Voucher packaging

Here, we will show you how to create an original voucher packet using Trotec LaserPaper Colour.

Preparation

You Will Need

1x LaserPaper Colour Dark Blue
1x LaserPaper Colour Gold
1x LaserPaper Colour Slate Gray
Liquid Glue
Sticky dots or double-sided adhesive tape

Machine Used

Speedy 300, 60 Watt
2" lens
Honeycomb Table

You can use any machine from the Speedy series to create this sample.

Info

We decided to use the 2" lens, because it tends to produce a straight, uniform result on a large engraving area.

ZIP

Download now

ZIP

Download now

Step by step

Step 1

Step 1: Create the Design Layout

Create your own design and adjust it according to your personal preferences. We decided to engrave the camouflage design, with three different grayscales, all within the one engraving process (more info on how to do this can be found here). Send the graphic for the outer shell to your laser machine with the settings below.

Print settings:

Process Mode	Resolution	Cut Line
Relief	500dpi	None

Halftone	Others
Colour	Enhanced Geometries, Inner Geometries First

Step 2

Step 2: Engraving Process: Outer Shell

Place the Dark Blue LaserPaper into your Trotec laser engraving machine and focus on its surface. Create the parameter settings. Please note that the parameters can vary depending on the laser machine you are using and its available laser power.

Laser Parameters:

Colour	Process	Power (%)	Speed (%)	ppi/Hz
Black	Engraving CO₂	40	20	500
Red	Engraving CO₂	9	2	1000
Blue	Cutting CO₂	18	2	1000

Passes	Air Assist	Advanced
1	ON	High Quality
1	ON	-
1	ON	-

Tip:

We suggest covering the remaining working area with scrap paper or extra material to achieve the best possible vacuum.

Step 3

Step 3: Inner Frame & "Strip Curtain"

Send all the graphics for the frame and strip curtains to your laser machine using these parameters:

Print Settings:

Process Mode	Resolution	Cut Line
Vector Job	1000dpi	None

Halftone	Others
Colour	Inner Geometries First

Step 4

Step 4: Cutting: Inner Frame & "Strip Curtain"

Place the Slate Gray LaserPaper into your Trotec laser machine and cut out the frame. Then, cut the strip curtain out of the Gold LaserPaper. You are free to use the same laser parameters for each design.

Laser Parameters:

Colour	Process	Power (%)	Speed (%)	ppi/Hz
Blue	Cut CO₂	18	2	1000

Passes	Air Assist	Z-Offset	Advanced
1	ON	0	-

Step 5

Step 5: Assembly

Secure the frame to the inner part of the cover (where the grip-hole is) using a liquid glue or simple double-sided tape. Now, take the strip curtain and gently apply more double-sided tape to the bottom of the left strip as well as on the top of the right strip. Insert the curtain into the cover and secure it. Now, when you open the card, the strips will move like a curtain!

Inspiration

Whatever you are doing - creating a birthday card, gift packaging or anything in between - The Trotec LaserPaper range can give you so many colour and application options. The sky is your only limit!
LaserPaper 'Wood' has a thin layer of real wood, allowing you to create very trendy, eye-catching applications.