Laserski gravirana
Softdrink Glass

Korak po korak vodič

Add value to inexpensive drinking glasses with decorations, names or designs. We have used the rotary attachment to add style to a 10 ¼ oz drinking glass (31 cl).

Priprema

Required material

10 ¼ oz glass (31 cl)
Paper towel
Water
Sponge

Trotec laser used

Speedy 300
30 watts
2 inch lens

csm_glass-softdrink_22ee5513ef.png

PDF

Preuzmite odmah

PDF

Preuzmite odmah

Soft Drink Glass

ZIP

Preuzmite odmah

ZIP

Preuzmite odmah

Korak po korak

Korak 1

Step 1: Preparation

First, take a slightly moist paper towel. Preferably use a sponge or a spray bottle for moistening. Place the paper towel on the surface that you wish to engrave later. This will prevent splintering of the glass during the engraving process.

Korak 2

Step 2: Rotary Attachtment

Place the rotary engraving attachment into the laser and insert it. Next, switch the laser on. You can now clamp the glass into the rotary attachment and focus on the surface. If you use a conical glass, tilt the rotary attachment until the engraving surface is positioned parallel to the work table.

Korak 3

Step 3: Used Laser Settings

Open the file "BBQ Glass" and send it to the laser. Make sure that the rotary attachment is enabled in the driver and that you have entered the correct diameter of the glass. You can now start the engraving process.

WE HAVE USED THE PARAMETERS INDICATED BELOW FOR ENGRAVING THE GLASS:

Engraving: Power: 100 %, Speed: 20 %, Resolution: 500 dpi

Korak 4

Step 4: Cleaning

As soon as the engraving is complete, remove the paper from the glass.

Serija Speedy
Savršeni stroj za lasersko graviranje i rezanje za personalizaciju.

Otkrijte strojeve za lasersko graviranje i lasersko rezanje

Imate li pitanja o primjenama ili postavkama?
Rado ćemo vas savjetovati o svim mogućim pitanjima, bilo da se radi o laserskom softveru Air Assist ili parametru z-offset.

Kontaktirajte nas