Laser engraved
Softdrink Glass

Step by step guide

Add value to inexpensive drinking glasses with decorations, names or designs. We have used the rotary attachment to add style to a 10 ¼ oz drinking glass (31 cl).

Preparation

Required material

10 ¼ oz glass (31 cl)
Paper towel
Water
Sponge

Trotec laser used

Speedy 300
30 watts
2 inch lens

csm_glass-softdrink_22ee5513ef.png

PDF

Download now

PDF

Download now

Soft Drink Glass

ZIP

Download now

ZIP

Download now

Step by step

Step 1

Step 1: Preparation

First, take a slightly moist paper towel. Preferably, use a sponge or a spray bottle for moistening. Place the paper towel on the surface that you wish to engrave later. This will prevent the glass from splintering during the engraving process.

Step 2

Step 2: Rotary Attachtment

Place the rotary engraving attachment in the laser and attach it. Next, switch the laser on. You can now clamp the glass into the rotary attachment and focus onto its surface. If you use a conical glass, tilt the rotary attachment until the engraving surface is positioned parallel to the work table.

Step 3

Step 3: Used Laser Settings

Open the "BBQ Glass" file and send it to the laser. Make sure that the rotary attachment is enabled in the driver and that you have entered the correct diameter of the glass. You can now start the engraving process.