--------------------------
individual engraving on drink glass

Laser engraved
Softdrink Glass

Step by step guide

Increase the value of inexpensive drinking glasses by adding designs, names and/or decorations. We used a rotary attachment to add style to a 10 ¼ oz drinking glass (31 cl).

Preparation

Required material
  • 10 ¼ oz glass (31 cl)
  • Paper towel
  • Water
  • Sponge
Trotec laser used
  • Speedy 300
  • 30 watts
  • 2 inch lens
csm_glass-softdrink_22ee5513ef.png

PDF

Download now
Soft Drink Glass

ZIP

Download now

Step by step

individual engraving on drink glass
Step 1

Step 1

First, take a slightly moist paper towel, preferably use a sponge or a spray bottle for moistening. Place the paper towel on the surface that you wish to engrave later. This will prevent splintering of the glass during the engraving process.

protect glass during engraving
Step 2

Step 2

Place the rotary engraving attachment into the laser and insert before, switching the laser on. You can now clamp the glass into the rotary attachment and focus on the surface. If you use a conical glass, tilt the rotary attachment until the engraving surface is positioned parallel to the work table.

Step 3

Step 3

Open the file "BBQ Glass" and send it to the laser. Make sure that the rotary attachment is enabled in the driver and that you have entered the correct diameter of the glass. You can now start the engraving process. We have used the parameters indicated below for engraving the glass:

LASER SETTINGS

Speed: 20 %
Power: 100 %
Resolution: 500 dpi

laser engrave a softdrink glass
Step 4

Step 4

As soon as the engraving is complete, remove the paper from the glass.

Speedy series
The ideal laser engraver and cutter for personalisation.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo