Voucher packaging

In this new tutorial, learn how to create a personalised and original voucher packaging with our new Trotec LaserPaper Color.

Preparation

Material required

1 sheet of LaserPaper Color dark blue
1 sheet of LaserPaper Color gold
1 sheet of LaserPaper Color slate gray
liquid glue
Double-sided adhesive tape

Machine used

Speedy 300, 60 Watt
2" lens
honeycomb table

For this example, you can use any laser machine from the Speedy laser engraver series.

Info

We used the 2" lens because it produces a more uniform result on large-area engravings.

ZIP

Download now

ZIP

Download now

Step by step

Step 1

Step 1: Create the design layout

Create your own design and adjust according to your preferences. We engraved the camouflage design with all three different grayscales in just one engraving process. Learn how this works here. Send the graphic for the outer shell to the laser using the settings below:

Print settings:

Process mode	Resolution	Cut line
Relief	500 dpi	none

Halftone	Others
Color	enhanced geometries, inner geometries first

Step 2

Step 2: Engraving process outer shell

Place the dark blue LaserPaper Color into your Trotec laser and focus exactly on the surface. Make the parameter settings. The parameters can differ depending on the laser machine used and laser power available.

Laser parameters:

Color	Process	Power (%)	Speed (%)	ppi/Hz
black	Engraving CO₂	40	20	500
red	Engraving CO₂	9	2	1000
blue	Cutting CO₂	18	2	1000

Passes	Air Assist	Advanced
1	on	High Quality
1	on	-
1	on	-

Tip:

Cover the remaining working area with standard paper to achieve full vacuum.

Step 3

Step 3: Design inner frame and "strip curtain"

Send every single graphic for frame and strip curtain to the laser using the following parameters:

Print settings:

Process mode	Resolution	Cut line
Vector job	1000 dpi	none

Halftone	Others
Color	Inner geometries first

Step 4

Step 4: Cutting inner frame and "strip curtain"

Place the slate gray LaserPaper Color into your Trotec laser and cut the frame. Then cut the strip curtain out of the golden LaserPaper. You can use the same parameters for both designs.

Laser parameters:

Color	Process	Power (%)	Speed (%)	ppi/Hz
blue	Cut CO₂	18	2	1000

Passes	Air Assist	Z-Offset	Advanced
1	on	0	-

Step 5

Step 5: Assembly

Take the frame and secure it on the inner part of the cover (where the grip hole is) using liquid glue or double-sided adhesive disks. Now take the strip curtain and apply double-sided adhesive tape on the bottom of the far left stripe, and on top of the far right paper strip. Insert the strip curtain into the cover and secure it. If you open the card, the stripes move like a curtain and are a great eye catcher.

Inspiration

Whether you are making a birthday card, gift packaging or seasonal greetings: The Trotec LaserPaper range offers many colours for different applications.
LaserPaper Wood has a thin foil of real wood which allows you to create particularly interesting applications. Learn more about it:

LaserPaper Wood