--------------------------
Laser cutting moving windmill

Moving wind turbine

TroCraft Eco and TroGlass are excellent Trotec materials for model making. Build this wind turbine, complete with moving blades, by using just a few small parts and the following instructions.

Preparation

Machines Used:

You can also create this application using any other machine in the Speedy laser engraving series.

Tip
  • Throw your own spin on this application by trying out different Trotec materials and colors.

Step by step

trotec print settings trocraft 1mm
Step 1

Step 1: Design

Bring in the graphics and adjust the file to suit your needs. Use the following print settings to send the graphic file to the laser:

Process Mode Resolution Cut Line
Vector Job 1000dpi none
Halftone Others
Color Enhanced Geometries, Inner Geometries first
Laser process windmill
Step 2

Step 2: Laser Process the TroCraft Eco (1mm)

Place the thin TroCraft Eco on the honeycomb cutting table in your machine and mask the rest of the working surface to build a stronger vacuum. Depending on the machine used and laser power available, parameters may vary.

Color Process Power output % Speed % ppi/Hz
Red CO2 cutting 66 2 1,000
Passes Air Assist Z offset Advanced
1 On 0mm -

Tip:

Use a small nozzel when working with TroCraft Eco for a clean cut quality.

Trotec print settings TroCraft 3mm
Step 3

Step 3: Print the Wind Turbine to the Laser

Use the following settings to send the turbine column graphics to your laser machine:

Process Mode Resolution Cut Line
Standard Job 333dpi None
Halftone Others
Color Enhanced Geometries
Laser cutting trocraft for moving windmill
Step 4

Step 4: Laser Process TroCraft Eco (3mm)

Place the 3mm thick TroCraft Eco on the honeycomb cutting table in your laser, and cover the rest of the working area again. Use the following settings to send the file to the laser. The laser parameters may change depending on the machine used and the available laser power.

Laser parameters: Engraving

Color Process Power % Speed % ppi/Hz
Black Engrave CO2 15 50 500
Passes Air Assist Z offset Advanced
1 on 0mm High Quality

Laser parameters: Cutting

Color Process Power % Speed % ppi/Hz
Red CO2 cutting 100 0.8 1,000
Passes Air Assist Z-offset Advanced
1 On 0mm -
print settings troglass 3mm
Step 5

Step 5: Print the Stand to the Laser

Use these settings to send the TroGlass stand graphics to your Trotec Laser:

Process Mode Resolution Cut Line
Standard Job 500dpi None
Halftone Others
Color Enhanced Geometries, Inner Geometries first
laser cutting acrylic troglass black
Step 6

Step 6: Laser process the TroGlass Black Satins

Swap out the honeycomb cutting table for your acrylic cutting table and place the TroGlass material in your Trotec Laser.

Laser parameters: Engraving

Color Process Power % Speed % ppi/Hz
Black Engrave CO2 20 50 500
Passes Air Assist Z offset Advanced
1 On 0.5mm High Quality

Laser parameters: Scratching

Color Process Power % Speed % ppi/Hz
Red CO2 cutting 50 0.4 5,000
Passes Air Assist Z offset Advanced
1 On 0mm -

Tip:

The large nozzel the best choice for working with TroGlass material.

Assemble laser cut windmill
Step 7

Step 7: Assembly

Lay out all 4 parts.

Stick the wind turbine pillar into the base, and then hang the blade component on the nose and fix it with the small circle of TroGlass.

Press it just tight enough so that the wind turbine can turn.

The Trotec material made mobile wind turbine is ready.

inspiration laser cutting windmill

Inspiration

  • You can also create a modern, three-bladed wind turbine as an alternative to this "Don Quijote" style.
  • Make it your own by using other TroGlass colors.
  • Glue the fastening loop from the TroGlass for a more secure structure.

Speedy series
The ideal laser engraver and cutter for personalization.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo