Laser engraved agate pendant

Create an agate pendant with your Trotec laser machine.

Preparation

Required material

Agate disks
Leather band

Machine used

Speedy 360, 100 Watt
1.5" lens
Vacuum table

For this sample you can use any laser machine from the Speedy laser engraver series.

Tip

We used the 1.5" lens for this sample because we wanted to engrave a filigree design.

Agate Pendant Parameters

ZIP

Download now

ZIP

Download now

Agate Pendant Lasameter

ZIP

Download now

ZIP

Download now

Step by step

Step 1

Step 1: Import design

Create your own design or use our file. We scanned the agate disk so that our design is exactly the right size and shape for the stone, then send the job to the laser machine with the settings below:

Print settings

Process mode	Resolution	Cut line
Standard	1000 dpi	none

Halftone	Others
Color

TIP:

For the perfect result with our detailed graphics we used the highest possible resolution of 1000 dpi for our engraving job.

Step 2

Step 2: Engraving the agate

Place the disk in the Trotec machine and focus the laser on the surface. If the stone is round, focus on the average value of the engraving area. Make the material parameter settings. Keep in mind that the parameters can vary depending on laser machine and available laser power.