Marble lucky charm
Step by step instruction
Marble lucky charm
Step by step instruction
Create beautiful lucky charms out of small, simple stones!
Preparation
You Will Need
Small, plain marble stones (we used a marble mosaic tile)
Machine used
- Speedy 360, 100 Watt
- 1.5" lens
- Vacuum table
You can use any laser machine from the Speedy series for this project.
Tip
We recommend using the 1.5" lens for engraving fine details (including designs like ours).
Step by step
Step 1: Import the Design
Create your own design, or feel free to import our template. Then, send the job to your laser machine using the following driver settings:
Print Settings
Process Mode | Resolution | Cut Line |
---|---|---|
Standard | 1000 dpi | None |
Halftone | Others |
---|---|
Colour | - |
TIP:
Because of the detailed graphics, we decided to use the highest possible resolution (1000 dpi) for our engraving job. This made it possible to achieve the best possible quality.
Step 2: Engraving the Marble
First, you'll need to wash the natural dust off the stone. You can do this by holding the stone under running water. Once you've dried it, place it inside your Trotec laser machine and focus on its surface. If your stone is rounded, focus on the average value of the engraving area. Now, enter the material parameter settings. These settings can vary depending on the laser machine you are using and its available power.
LASER PARAMETERS:
Colour | Process | Power (%) | Speed (%) | ppi/Hz |
---|---|---|---|---|
Black | Engrave CO2 | 50 | 20 | 1000 |
Passes | Air Assist | Z-Offset | Advanced |
---|---|---|---|
1 | On | - 0.5 mm | - |
INFO:
We decided to use a negative offset value. Therefore, the surface is exposed to an increased amount of laser power, and the engraving will appear much more contrasted.
Step 3: Cleaning
Give your stone a quick wipe with a damp cloth. Be careful not to place the stone under running water this time - this might wash away the engraving dust that creates the beautiful, stark contrast you can see.
Inspiration
You can engrave anything you want onto stones - quotes, slogans, pictures and much more! The sky is your only limit with laser technology!
You can even personalise the stones with names and dates, adding extra, personal value to your products.