Laser engraved brick

Find out how you can make an original present for home-builders using a simple clay brick.

Laser engraved brick

Find out how you can make an original present for home-builders using a simple clay brick.

Preparation

You Will Need

Regular clay brick

Machine Used

Speedy 360, 100W
1.5" lens
Vacuum table

You can create this sample on any machine from the Speedy series.

Tip

We used a 1.5" lens because our design has many fine details. For simpler designs, you only need to use the 2" lens.

Laser Engraved Brick

ZIP

Download now

ZIP

Download now

Engraved Brick Parameters

ZIP

Download now

ZIP

Download now

Step by step

Step 1

Step 1: Import Your Design

Create the design you want to engrave on the brick! Or, feel free to import our available template. Send the job to the laser machine using the driver settings below:

Print Driver Settings

Process Mode	Resolution	Cut Line
Standard	500 dpi	None

Halftone	Others
Colour

Step 2

Step 2: Engraving Your Brick

Place the brick inside your Trotec laser machine and focus carefully on the surface of the material. Enter the parameter settings - these can vary depending on the laser machine you are using and its available laser power.