Laser engraved brick

Find out how you can make an original present for home-builders using a simple clay brick.

Laser engraved brick

Find out how you can make an original present for home-builders using a simple clay brick.

Preparation

Required material

Clay brick from any good supplier

Laser machine used

Speedy 360 laser engraving machine, 100 Watt
1.5" lens
Vacuum table

You can use any Speedy laser engraving machine to engrave the brick.

Tip

We used the 1.5" lens because was we were engraving a detailed design. For less detailed designs you can use the 2" lens.

Laser Engraved Brick

ZIP

Download now

ZIP

Download now

Engraved Brick Parameters

ZIP

Download now

ZIP

Download now

Step by step

Step 1

Step 1: Import design

The first step is to create your own design or import our template. Use the below parameters to send the job to the laser.

Print driver settings

Process mode	Resolution	Cut line
Standard	500 dpi	none

Halftone	Others
Colour

Step 2

Step 2: Laser engraving the brick

Put the brick onto your Trotec laser engraving machine's bed and focus on the material's surface, Then create the material parameter settings. These will vary depending on laser machine and its available laser power.

Laser Parameters engraving

Colour	Process	Power (%)	Speed (%)	ppi/Hz
black	engrave CO₂	100	30	500

Passes	Air Assist	Z-Offset	Advanced
1	on	+1 mm	high quality

Step 3

Step 3: Cleaning

Use a wet sponge to clean the surface and bind the dust. That's it, your brick is now ready to be gifted or sold.

Inspiration

Each brick can be personalised with names and dates.

Speedy series
The ideal laser engraver and cutter for personalisation.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.