--------------------------
laser-engrave-agate

Ciondolo di agata personalizzato

Istruzioni passo dopo passo

Preparazione

Required material
  • Agate disks
  • Leather band
Machine used
  • Speedy 360, 100 Watt
  • 1.5" lens
  • Vacuum table

For this sample you can use any laser machine from the Speedy laser engraver series.

Tip

We used the 1.5" lens for this sample because we wanted to engrave a filigree design.

Parametri ciondolo agata

ZIP

Scarica ora
Ciondolo agata Lasameter

ZIP

Scarica ora

Passo dopo passo

stone-laser-engraving-graphic-program
Fase 1

Step 1: Import design

Make your own design or import our template. We scanned our agate disk to adapt our design directly to the shape of the stone. Send the job to the laser using the driver settings below.

Print settings

Process mode Resolution Cut line
Standard 1000 dpi none
Halftone Others
Color  

TIP:

For a perfect result of our detailed graphics we used the highest possible resolution of 1000 dpi for our engraving job.

laser-engraving-stone-pendant
Fase 2

Step 2: Engraving the agate

Position the agate disk into your Trotec Laser and focus on the surface. If the stone is rounded, focus on the average value of the engraving area. Make the material parameter settings. The parameters can vary depending on laser machine and available laser power.

Laser Parameters engraving

Color Process Power (%) Speed (%) ppi/Hz
black Engrave CO2 50 30 1000
Passes Air Assist Z-Offset Advanced
1 on + 1.5 mm high quality

Tip:

Due to the +1.5 mm z-offset (out of focus) the contrast is higher than engraving in focus.

agate-pendant-stone-engraving
Fase 3

Step 3: Post-processing and assembly

The pendant does not have to be cleaned after engraving. Add a leather band or a pin and your personalized agate pendant is ready.

personalized-agate-pendant

Inspiration

Logos, aphorisms or congratulations: With a little creativity you can fulfil almost any customer request.

Serie Speedy
L’incisore laser e la laser cutter ideali per la personalizzazione.

Scoprite incisori laser e laser cutter

Avete domande sulle applicazioni o sulle impostazioni?
Siamo lieti di consigliarvi dalla A di Air Assist alla Z di offset Z.

Contattaci
Membro orgoglioso di troGROUP Logo