--------------------------
slate-laser-engraving

Weekly planner made of slate

Want to see all the events and tasks on your weekly calendar at a glance? Our slate planner is the perfect solution.

slate-laser-engraving

Weekly planner made of slate

Want to see all the events and tasks on your weekly calendar at a glance? Our slate planner is the perfect solution.

Preparation

Materials required
  • 1 slate sheet approx. 38 x 13 cm
  • 1 sheet solid wood oak 600 x 300 mm
  • 1/4 sheet TroLase ADA Signage black, 1 mm with double-sided adhesive tape 
  • 1 package (4 pieces) signage mounting devices (R20-156-FK)
  • Cardboard chalk or chalk markers
Laser engraving machine
  • Speedy 100
  • 40 Watt
  • 2" lens
  • Honeycomb cutting table for laser cutting wood

For this sample you can use any Speedy laser engraving machine.

Important information

Use the extra strong adhesive on the TroLase ADA Signage so that the slate board is securely fixed.

Slate Weekly Panner

ZIP

Download now
Laser Parameters Slate Planner

ZIP

Download now

Step by step

slate-laser-engraving
Step 1

Step 1: Slate board

The first step is to either create your own design or import our ready made template. You may need to adapt the graphic to the size of your slate board.

Next send the job to the laser using the driver settings below.

Print settings:

Process mode Resolution Cut line
Standard 500 dpi none
Halftone Others
Colour  -
Stone laser engraving
Step 2

Step 2: Laser engraving slate

Create the material parameter settings. These will vary depending on your laser machine and its available power.

Tip:

To avoid wasted material test the parameters on the back of the slate board.

Laser Parameters

Colour Process Power (%) Speed (%) ppi/Hz
Engraving: black Engrave CO2 60 100 500
Scratching: red Cut CO2 20 2 1000
Passes Air Assist Z-Offset Advanced
1 on - optimised quality
1 on +6 mm -
Laser processing solid wood
Step 3

Step 3: Storage

For this step you can again create your own design or import our template, again adapting the graphic to the size of the slate sheets.

Send the job to the laser using the driver settings below.

Print settings: 

Process mode Resolution Cut line
Standard 500 dpi none
Halftone Others
Colour Optimised geometries, inner geometries first

Tip:

Before laser cutting, measure the thickness of the wooden sheet, adapting the kerf if necessary. Make sure the diameters are large enough to hold your slate.

Solid wood laser cutting
Step 4

Step 4: Laser cutting wooden frame

Determine and enter the material parameter settings. As with the slate these will vary depending on your laser machine and its available power.

Laser Cutting Parameters

Colour Process Power (%) Speed (%) ppi/Hz
red Cut CO2 95 0.3 1000
Passes Air Assist Z-Offset Advanced
1 on - -

Info:

In our example we have used the standard parameters in JobControl for solid wood - oak.

Laser processing the TroLase ADA Signage back
Step 5

Step 5: Back

The bqack can again feature a custom design or our template.

Send the job to the laser using the driver settings below.

Print settings:

Process mode Resolution Cut line
Standard 500 dpi none
Halftone Others
Colour Optimised geometries, inner geometries first
Laser ncutting TroLase ADA Signage
Step 6

Step 6: Laser cutting back

Determine and enter the material parameter settings, which will vary depending on laser machine and laser power available.

Laser cutting parameters

Colour Process Power (%) Speed (%) ppi/Hz
red Cut CO2 90 2 1000
Passes Air Assist Z-Offset Advanced
1 on - -

Info:

We used the standard parameters in JobControl for TroLase ADA Signage optimized for quality.

Assembling the slate planner
Step 7

Step 7: Assembly

Position the slate inside the wooden frame. As the wooden frame has to accommodate the size of the slate this stage is important as it prevents the wood being distorted later.

Next glue the back of the TroLase ADA Signage to the slate and wood. Precise accuracy is not essential as our design leaves sufficient "wiggle room" for positioning the back plate.

The final step is to add the signage mounts, and your planner is ready for use.

Inspirations

Using different shapes and designs, you can create personalised planners for customers.

You can also fix the planner directly to the wall negating the need for signage mounting devices. This will save production time as you don't need to create the extra holes.

Speedy series
The ideal laser engraver and cutter for personalisation.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo