Covid-19 Signs

Here you will find templates for the quick creation of Covid-19 signs from TroLase, TroLase Foil and TroGlass.

Covid-19 Signs

Here you will find templates for the quick creation of Covid-19 signs from TroLase, TroLase Foil and TroGlass.

Preparation

Materials: "Wash hands" Sign (Option 1)

1/4 sheet of Yellow/Black TroLase (1/16")
1/4 sheet of Blue/White TroLase (1/16") with adhesive backing

Materials: "Wash hands" Sign (Option 2)

1/4 sheet of Gloss/White TroGlass Reverse (1/8")
1/4 sheet of Blue/White TroLase (1/16") with adhesive backing
Black acrylic paint

Materials: "Please keep your distance" Floor Decal

1/4 sheet of Red/While TroLase Lights Premium (0.008")

Equipment: Trotec Laser and Accessories

Any laser engraver from the Speedy series can be used to make these projects.

Tip

You will achieve the best results if you prevent thin sheet materials — such as TroLase — from moving while being laser processed. If the sheets cover your Trotec laser's entire work area, we recommend using a vacuum table or an adhesive mat.

If, on the other hand, the sheets only cover a fraction of the work area, you can cover the remaining space with scrap or standard printing paper. This will strengthen the laser's vacuum suction on your materials, thereby helping to keep them in place.

sign-wash-hands-keep-distance.zip

ZIP

Download now

ZIP

Download now

Step by step

Step 1

Step 1: Prepare Your Design(s) for Laser Processing

Create your own design, or use our templates (below) and make any desired edits. Once your artwork is finalized, send each job to the laser with the settings below.

Important

If you intend to use TroGlass Reverse, your artwork must be mirrored. Otherwise, the sign will not be legible from the front. You can easily flip the graphics horizontally in JobControl®.

Print Settings

Process mode	Resolution	Cut line
standard	500dpi	none

Halftone	Other
-	Optimized geometries, inner geometries first

Step 2

Step 2: Laser Cut and Engrave Your Materials

Peel the protective film from your TroLase and/or TroLase Lights Premium sheet(s). Do NOT remove the film from the TroGlass Reverse sheet, as it prevents scratches from forming while it is being laser cut or engraved.

Place your first sheet on the aluminum cutting grid table (or honeycomb cutting tabletop) in your laser. Next, enter the corresponding processing parameters (see the table below). Please note that the optimal settings may vary depending on your Trotec model and its maximum wattage.

Once your first sheet has been processed, proceed to process the remaining materials.

Laser Parameters:

Material	Color	Process	Power (%)	Speed (%)	ppi/Hz	Passes	Air Assist	Z-Offset	Direction	Advanced
TroLase Foil	black	Engrave CO₂	55	80	500	1	off	1.5	bottom to top	-
	red	Cut CO₂	40	1	2000	1	on	0	-	-
TroLase	black	Engrave CO₂	65	80	600	1	off	1.5	bottom to top	-
	red	Cut CO₂	60	1	2000	1	on	0	-	-
TroGlass Reverse	black	Engrave CO₂	18	20	500	1	on	0	bottom to top	-
	red	Cut CO₂	60	1	2000	1	on	0	-	-

Step 3

Step 3: Assemble the Signage

Slightly dampen a cloth with lukewarm water to remove any residue from your materials.

To assemble the handwashing signs, affix the Blue/White TroLase to the Yellow/Black TroLase or Gloss/White TroGlass Reverse. If you are marking the second handwashing sign (i.e., Option 2), remember to remove the protective film from the reverse side of the TroGlass.

No additional steps are needed to prepare the TroLase Thins Premium floor decal.

Speedy series
The ideal laser engraver and cutter for personalization.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.