![diy fridge magnet 2](/static_processed/405069a5c61b8c4c4aa1e91e20a0285e/.jpg?{"image":"https://backend.troteclaser.com/static/images/knowledge/diy-samples/guitar-magnet/diy-fridge-magnet-2.jpg","edits":{"resize":{"width":1280,"height":640,"fit":"cover"}},"outputFormat":{"format":"webp"}})
Guitar magnet
In only a few steps you can make this fridge magnet made out of veneer wood.
Guitar magnet
In only a few steps you can make this fridge magnet made out of veneer wood.
Preparation
Required material
- 1 sheet wood veneer oak 3mm
- Magnet foil approx. 20 x 35mm or round magnet
Machine used
- Speedy 360, 80 watts
- 2" lens
- Nozzle with small hole
- Honeycomb cutting tabletop
Note: You can use any laser machine from the Speedy series for this DIY application.
Tip
Step by step
![diy fridge magnet 3](/static_processed/96dd211492f7c85d9a1af0aa9d5b33cf/.jpg?{"image":"https://backend.troteclaser.com/static/images/knowledge/diy-samples/guitar-magnet/diy-fridge-magnet-3.jpg","edits":{"resize":{"width":650,"fit":"cover"}},"outputFormat":{"format":"webp"}} "diy-fridge-magnet-3.jpg")
Step 1: Import the design file
Feel free to create your own unique design or simply use our template. Send it to the laser with the recommended laser parameters below. The parameters may vary depending on the laser machine used and the laser power available.
Print settings:
| Process mode | Resolution | Cut line |
|---|---|---|
| Standard | 500 dpi | none |
| Halftone | Others |
|---|---|
| Color | enhanced geometries, inner geometries first |
![laser cutting wood veneer magnet](/static_processed/5700bdb783c280c8acf45736aa74165d/.jpg?{"image":"https://backend.troteclaser.com/static/images/knowledge/diy-samples/guitar-magnet/laser-cutting-wood-veneer-magnet.jpg","edits":{"resize":{"width":650,"fit":"cover"}},"outputFormat":{"format":"webp"}} "laser-cutting-wood-veneer-magnet.jpg")
Step 2: Laser process wood
Position the material on the honeycomb cutting table in your laser machine. Ensure that the rest of the work area is covered to allow for a stronger vacuum.
Laser Parameters:
| Process | Color | Process | Power (%) | Speed (%) | Ppi/Hz |
|---|---|---|---|---|---|
| Engraving | Black | Engrave CO2 | 70 | 50 | 500 |
| Engraving | Blue | Engrave CO2 | 50 | 50 | 500 |
| Engraving | Cyan | Engrave CO2 | 70 | 50 | 500 |
| Cutting | Red | Cut CO2 | 100 | 1 | 1000 |
| Passes | Air Assist | Z-Offset | Direction | Advanced |
|---|---|---|---|---|
| 1 | ON | 6 mm | Top down | HQ |
| 1 | ON | 1 mm | Top down | HQ |
| 1 | ON | 3 mm | Top down | HQ |
| 1 | - | - | - | - |
![assemble wooden magnet](/static_processed/002343c6d526cd2e1902a4c57c6e119b/.jpg?{"image":"https://backend.troteclaser.com/static/images/knowledge/diy-samples/guitar-magnet/assemble-wooden-magnet.jpg","edits":{"resize":{"width":650,"fit":"cover"}},"outputFormat":{"format":"webp"}} "assemble-wooden-magnet.jpg")
Step 3: Assemble the magnet
Remove the cut guitar from the laser machine. Then, glue the magnetic foil to the back of the guitar.
![diy fridge magnet 2](/static_processed/fccc6250014abf187fe85cfb4d813257/.jpg?{"image":"https://backend.troteclaser.com/static/images/knowledge/diy-samples/guitar-magnet/diy-fridge-magnet-2.jpg","edits":{"resize":{"width":640,"fit":"cover"}},"outputFormat":{"format":"webp"}})
One of the popular wood species: oak
Our varnished oak veneer range is hugely popular and is especially suited for laser processing. Our veneered oak material can be used for a wide range of applications, including signs, gifts, architectural models and more! Create a variety of different guitar models using different laser settings and laserable wooden material.
![](/static_processed/5b58a61a467804661df93e96a66f70dc/laser-engraver-speedy-400-left.png?{"image":"https://backend.troteclaser.com/static/images/Laser_Machines/Speedy_Series/laser-engraver-speedy-400-left.png","edits":{"extract":{"top":142,"left":497,"width":933,"height":393},"resize":{"width":650,"fit":"cover"}},"outputFormat":{"format":"webp"}})
![](/static_processed/39b137145fe3b080cdb057970b3d2919/contact-ferdinand.jpg?{"image":"https://backend.troteclaser.com/static/images/contact/contact-ferdinand.jpg","edits":{"resize":{"width":194,"height":194,"fit":"cover"}},"outputFormat":{"format":"webp"}})
![](/static_processed/67e459f12bea2c3ed28796b6006d8699/christmas-tree-troglitter.jpg?{"image":"https://backend.troteclaser.com/static/images/News/DE/2023-12-frohe-weihnachten/christmas-tree-troglitter.jpg","edits":{"resize":{"width":480,"height":480,"fit":"cover"}},"outputFormat":{"format":"webp"}})
