Laser Marking with Trays
For large quantities, you can increase your productivity by 40% by using a larger laser workstation and trays.
How to use trays or templates to minimize handling requirements
Want to mark several parts in one operation to save time? Trays are very useful tools for that purpose. Depending on the batch size and required marking time, you can also use larger laser workstations. This allows you to mark more components in one operation and maximize output. Thus time-consuming handling through loading and removal is reduced. Here is a time comparison when using a SpeedMarker 700 and SpeedMarker 1300.
40% more productivity by using a SpeedMarker 1300 and large trays
Comparison: Laser marking a metal bracket with SpeedMarker 700 and SpeedMarker 1300
In our example, we engrave this metal bracket with a SpeedMarker 700 and a tray for 3 pieces. In comparison to that, we engrave 24 pieces in a SpeedMarker 1300 with a tray with the same laser parameters. Projected to 240 pieces, this results in a productivity increase of 16 minutes or 40%.
Time calculation SpeedMarker 700 | |
---|---|
Piece/workpiece carrier | 3 |
Laser time/piece | 5.25 seconds |
Opening and closing time | 4 seconds |
Traverse axes | 0 seconds |
Loading and unloading/workpiece carrier | 10 seconds |
Time/workpiece carrier | 29.75 seconds |
Repetitions | 80 |
Time/240 pieces | 39 mins 40 seconds |
Time calculation SpeedMarker 1300 | |
---|---|
Piece/workpiece carrier | 24 |
Laser time/piece | 5.25 seconds |
Opening and closing time | 4 seconds |
Traverse axes | 2 seconds |
Loading and unloading/workpiece carrier | 10 seconds |
Time/workpiece carrier | 142 seconds |
Repetitions | 10 |
Time/240 pieces | 23 mins 40 seconds |
Conclusion: By reducing time-consuming handling, you can increase productivity by 40%
The laser time, the opening and closing of the door in automatic mode and the loading and unloading of the workpiece carrier take the same amount of time with both laser machines. With the SpeedMarker 1300, the axes move to take advantage of the entire working space. This takes a total of 2 seconds per workpiece carrier. The deciding factor is the necessary repetitions. While the loading and unloading as well as the opening and closing of the door only takes place 10x with the SpeedMarker 1300, this process repeats a total of 80x on the SpeedMarker 700. Thus time-consuming handling can be significantly reduced by using a larger workstation with large tr
Tip: Creating templates
Learn how to easily make the right template for your workpieces with a Speedy laser engraver.
SpeedMarker: High-speed marking laser for industrial applications
Our SpeedMarker marking lasers are designed to meet industrial marking requirements in the most effective and efficient way. Thanks to high-speed galvo lasers, you can mark components within seconds. The laser systems are available in various sizes and configurations, allowing you to find the best possible solution for customer-specific marking tasks.