Safetycone

Laser protection cone for integration lasers

Ideal safety solution for integrated laser markers

Integration lasers are generally assigned to Laser Class 4. This means that when they are integrated into production lines, it is important to take into account comprehensive protective measures, such as enclosures, etc. In order to reduce costs and minimize effort for integrators, mechanical engineers, and production companies while ensuring complete safety, Trotec has developed the Safetycone laser protection cone. The patented Safetycone permits laser operation under Laser Class 1 and consequently the highest possible safety levels for your production environment.

Explanation of laser classes

Lasers are divided into internationally recognized safety classes based on their power and the associated risk of injury to eyes and skin: Class 1 offers the highest level of safety. Class 4 devices can emit laser radiation. In detail, this means:

Laser Class	Hazard assessment / Explanation	Trotec Systems
1	The accessible laser radiation of this class is harmless – even with long-term exposure or the laser machine is in a radiation-tight housing.	InMarker with Safetycone VIN Marker with Safetycone
2	These include visible laser machines (e.g. laser pointers with less than 1mW of power), which are only eye-safe when exposed to radiation of less than 0.25 seconds.	InMarker with Pilotlaser and Safetycone SpeedMarker Series Speedy Series
3	In any case, the accessible laser radiation is dangerous to the eye. Pay particular attention to reflections (e.g. from reflective material surfaces).	---
4	Here, damage can be caused to eyes and skin or fires can be started within the danger area of the laser system. With this laser class, the user is obliged to strictly adhere to protective regulations!	Integration laser without safety cone

Functionality of the Safetycone

The Safetycone is used to ensure laser safety housing for integration lasers in the InMarker series. Several sensors are used to monitor correct positioning. In order to actuate the sensors, the workpiece must be flush against the workpiece seal on the Safetycone; once the marking position is reached (and has been checked and released), the laser process is enabled. As part of the laser safety housing, the correct fit of the Safetycone is monitored by the safety control. If a sensor signal is lost, the interlock is immediately interrupted.

Download installation instructions

SafetyCone properties

Safety without protective housing

With protection in place through a number of sensors, the SafetyCone isolates the laser beam during the marking or engraving process on your component.

Requires only a little space

Extremely compact in size, the SafetyCone provides safe labeling of products and components, even within confined and restricted areas.

Simple integration

The modular design of the SafetyCone allows it to be easily mounted on the InMarker series integration lasers; it can also therefore be optimally integrated into an existing or new production line as a complete system.

Straight and curved surfaces

The labeling area with the SafetyCone is either 50 x 40 mm or 90 x 70 mm (InMarker) or 120 x 20 mm (VIN Marker), or can be individually adapted to your requirements. The standard versions are designed for flat surfaces. It is possible to customize the SafetyCone if the surface is curved or bent.

Cost-effective and space-saving

The SafetyCone is more cost-effective and takes up less space than laser protective housing, but still meets all occupational safety requirements in relation to employees.

Options (VIN SafetyCone)

In order to easily clean the SafetyCone and laser of any dust that has been produced (such as during deep engraving), an optional cleaning station is available.

Would you like to find out more about our industrial solutions? We are happy to advise you!

InMarker with SafetyCone

VIN marker with SafetyCone

Technical data

Model	VIN Marker	InMarker
Laser class	prepared using SafetyCone laser class 1	possible with SafetyCone and laser class 2 pilot laser, possible with SafetyCone without laser class 1 pilot laser and SafetyCone laser class 4
Marking area with SafetyCone only possible with a focal length of 160 or 163 mm.	Marking field X x Y: 120 x 20 mm Top area: 150 x 50 mm	Variant S - marking area X x Y: 50 x 40 mm / Top area: 80 x 70 mm Variant L - marking area X x Y: 90 x 70 mm / Top area: 120 x 100 mm Alternative variants: Customized
SafetyCone	Interfaces & integrated power supply
SafetyCone weight	4.9 kg	Variant S: 2.8 kg, Variant L: 3 kg
SafetyCone dimensions	205 x 220 x 230 mm	209 x 183.5 x 269.5 mm

Suitable for:

InMarker

Fiber laser and MOPA for labeling metal and plastics<br/> The powerful industrial laser engravers guarantee precise labeling with short cycle times as part of your production line, robot cell or production facility.

More about InMarker
Download our InMarker brochure

VIN Marker

Fiber laser for deep engravings for rapid inline VIN and PIN labeling<br/>These powerful integration lasers offer the perfect solution for the automotive industry. Co-developed, tested and used by household-name car manufacturers.

More about VinMarker

Applications and areas of use

The SafetyCone can be easily integrated with the InMarker series marking lasers without the need to make expensive changes to your production line. This solution eliminates the need for lots of space or for costly housing. Any industrial labeling (DPM / PIN / VIN) can be directly implemented in the line in short cycle times without the need to fix material.

Laser marking in the automotive industry

Laser marking of components made of metal or plastic

Find out more

Laser marking of electronic components

Marking of electronic parts and components.

Find out more

Watch manufacturing

High-quality and durable laser engraving of movements, bezels, crowns, housing.

Find out more

Laser engraving data plates

Laser marking dynamic data permanently and inexpensively on data plates.

Find out more

Traceability

Permanent, contactless and direct laser marking for digital production and manufacturing. With costs that are 10 times lower.

Find out more

Laser marking machining tools

Laser marking tools for machining technology

Find out more

Laser marking in medical technology

Laser marking of surgical and medical instruments or implants

Find out more

References from industry

Industry specialists for your series and integration requirements.

Our expert team in Key Accounts will provide you with advice and support for a feasibility study, training and commissioning. This team and the support of an additional 750 employees across the world provide you with a competent and reliable partner for your industrial processes.

Find out more about it

Would you like to find out more about our industrial solutions? We are happy to advise you!