Lasercut felt
easter decoration

Easter is around the corner and you do not have any decoration? No problem, it only takes two minutes to make this Easter craft with a Trotec laser!

Lasercut felt
easter decoration

Easter is around the corner and you do not have any decoration? No problem, it only takes two minutes to make this Easter craft with a Trotec laser!

Preparation

You Will Need

4mm polyesterfelt in any colour
Ribbon - various colours

Machine Used

Speedy 400 laser engraver
80 Watts
2" lens

csm_felt-easter-craft_fc836e5b4b.png

PDF

Download now

PDF

Download now

Step by step

Step 1

Step 1: Design & Text

We designed a lovely little Easter basket, along with a few small Easter egg decorations to hang around your house. You can personalise this basket with the name of the person you intend on giving it to, and you can use lots of different coloured felt too. If you're not a fan of the hanging Easter decorations, you can create other little trinkets like napkin rings or decorative flowers. We just want you to make the most out of your material - feel free to get creative!

Step 2

Step 2: Laser Settings

Send the file, along with your personal touches, to the laser machine. We used a Speedy 400 laser machine with 80 Watts of laser power to create this sample, and it only took us 2 minutes! These are the laser parameters we used:

Engraving: Power: 33% | Speed: 50% | Frequency: 500ppi | Air Assist: ON
Cutting: Power: 40% | Speed: 2% | Frequency: 1000 Hz | Air Assist: ON
Cutting-in: Power: 10% | Speed: 2% | Frequency: 1000 Hz | Air Assist: ON

cutting engraving easter craft and tie it together

Step 3

Step 3: Tie it together

When the laser processing is finished, remove the product from the machine. Tie the basket together at each end using your ribbon and attach any leftover ribbons to the hanging decorations.

Step 4

Step 4: DIY Presents & Decorations

You can use these items to decorate your home, your office or even fill the baskets with little chocolate Easter eggs and gift it to someone as an Easter present!

Step 5

Tips:

We suggest weighing down your felt in the laser machine and using the vacuum at the same time. This will ensure the felt stays flat.
For a unique and sophisticated look, try cutting out and engraving these Easter decorations using Trotec’s engravable wood.
If you use the Trotec SpeedMarker 700 for CO2 materials, you can cut and engrave coloured Easter eggs in a matter of seconds, with no post-processing!

Step 6

Inspirations?

We've also designed an ornamental Easter egg displaying the German phrase 'Frohe Ostern', or 'Happy Easter' in English.

You can always write other phrases, or even the name of someone special, and use this project as another gift this Easter. Please feel free to change the template as much as you want.

Easter Decoration

Speedy series
The ideal laser engraver and cutter for personalisation.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.