--------------------------
laser cutting egg holder

Laser-Cut Wooden
Easter Eggcup

We have designed a charming Easter decoration for you: An eggcup made from wood in the shape of an Easter Bunny. The cart is used for holding the egg. We used alder wood for making the eggcup. But it will also work with conventional plywood; ideally use poplar plywood for laser cutting.

Preparation

You Will Need
  • 3mm alder wood / poplar plywood
  • 1x Easter egg
Machine Used
  • Speedy 300
  • 60 watts
  • 1.5 inch lens
Tips

We suggest using a cutting table. This will prevent beam reflections on the back of your material.

wood-easter-eggcup-JC.zip

ZIP

Download now
csm_wood-easter-eggcup_161861edc6.png

PDF

Download now

Step by step

eggcup laser cut from wood
Step 1

Step 1:

Open the Easter Bunny file and send it to your laser machine. Begin the engraving and cutting process using the power and speed parameters indicated below. Please note that the parameters for this project may vary depending on the machine you are using and its available laser power.

Laser Settings:

  • Black (engraving) - Power: 25% | Speed: 10% | Resolution: 500dpi | Air Assist: ON
  • Red (cutting) - Power: 60% | Speed: 1% | Frequency: 1000Hz | Air Assist: ON | Correction: 10
laser setting wooden egg cup
Step 2

Step 2:

Once you have finished cutting all the parts that you will need, it's time to assemble them. If you wish, you can also paint them to give them a little extra creativity!

Download Instructions

Speedy series
The ideal laser engraver and cutter for personalisation.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo