--------------------------
3d wall decoration elephant 1

3D Wall Decoration: Elephant

With just a few cuts you can produce this three-dimensional elephant from TroCraft Eco laser material.

Preparation

Used material
  • 1 sheet TroCraft Eco plate thickness 1mm, 600 x 300mm
  • Cover material

Two pieces of the elephant's head can be made from one sheet of TroCraft Eco.

Machine used
  • Speedy 360
  • 120 watts
  • 1,5" lens
  • aluminum cutting grid table or honeycomb cutting tabletop

This sample can also be produced with all other machines of the Speedy laser engraver series.

For a wall decoration in a larger format (width approx. 60cm) the file is also available for free download. For this you need 6 pcs. TroCraft Eco in the plate thickness 3mm, 600 x 300m each. Adjust the parameter settings according to the thickness of the material.
Wall Decoration Elephant

ZIP

Download now

Step by step

3d wall decoration elephant 2
Step 1

Step 1: Import your design

Create your own design or use our template. Send the job to the laser with the settings below.

Print settings:

Process mode Resolution Cut line
Standard 500 dpi none
Halftone Others
Ordered Dithering optimized geometries,
inner geometries first
3d wall decoration elephant laser cutting
Step 2

Step 2: Laser process TroCraft Eco

Now make the parameter settings. Our suggested parameters may vary depending on the laser machine used and the available laser power.

Place a TroCraft Eco plate in the laser device. Cover the remaining work area around the material to create vacuum. Then start the engraving and cutting process.

Laser Parameters:

Color Process Power (%) Speed (%) ppi/Hz
 Black Engrave CO2 9 50 500 ppi
Red Cut CO2  24 2 1000 Hz
Passes Air Assist Z-Offset Direction Advanced
1 ON - top down High quality
1 ON - - -
3d-wall-decoration-elephant-assembly
Step 3

Step 3: Assembly

After the laser process, remove the individual parts from the laser unit. The parts are arranged in size or sequence from bottom right to top left.

Take the part of the elephant head without ear cut-outs and insert it at the cut-outs into the two grid elements, in each case into the rearmost slot. Proceed in sequence with all other parts of the elephant head in the same way. The order depends on the size of the individual parts - the smallest element is placed in the front slot.

Finally, turn the elephant head over and push the rectangular plate through the two slots on the back. This fixes the elements and at the same time serves as a suspension eyelet.

lasercut trocraft eco card

TroCraft Eco – the laser material made of recyclable resources

The people of today are once again focusing on sustainable and environmentally-friendly values, and therefore prefer materials that are 100% biodegradable. TroCraft Eco offers the best conditions for this. TroCraft Eco is produced without using additives, is fully biodegradable and emission-free.

Discover this great laser material

Speedy series
The ideal laser engraver and cutter for personalization.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo