Laser engraved door mat
Step by step instructions
Laser engraved door mat
Step by step instructions
Personalise traditional door mats using your Trotec laser machine and add extra value quickly and easily.
Preparation
Material required
- Single-colour door mat
Laser machine used
- Speedy 400, 120 watts
- 4" lens
- Vacuum table
You can use any Speedy laser engraver to engrave the door mat, depending on the size of the door mat.
Tip
As the door mat has a coarse structure we used a lens with long focal length to compensate for the unevenness of the material.
Step by step
Step 1: Import design
Firstly you need a design. Create your own or import our template.
Send the job to the laser using the driver settings below.
Print settings:
Process mode | Resolution | Cut line |
---|---|---|
Standard | 333 dpi | none |
Halftone | Others |
---|---|
Colour | - |
TIP:
As door mats are typically viewed from distance, you can use a lower resolution graphic for reduced production time.
Step 2: Laser engraving the door mat
Load the door mat onto your laser machine's bed. Select the parameters. The recommended settings will very depending on your laser machine and its available laser power.
LASER ENGRAVING PARAMETERS:
Colour | Process | Power (%) | Speed (%) | ppi/Hz |
---|---|---|---|---|
black | Engrave CO2 | 80 | 100 | 500 |
Passes | Air Assist | Z-Offset | Advanced |
---|---|---|---|
1 | ON | 4mm | - |
TIP:
A resolution of 333 dpi is sufficient as the image will not be viewed close up.
Inspiration
- Engrave logos of companies, sports clubs or other organisations or unique designs to create unique items
- You can also use slogans to create promotional gifts, or add phrases such as "Welcome home" to add to your range