Create your own design or feel free to import our template into your chosen graphics program. Send individual graphics to the laser machine with the parameter settings below. (We have already inverted the graphics)

Tip:

In JobControl's printer driver, you can easily invert your graphics. For complex designs, we recommend inverting them prior to sending them to the laser machine. 

Print settings

Create the parameter settings within the material database. Note that parameters can change depending on the laser machine and its power.

Laser Parameters:

Now, it's time to iron all the different designs onto the pillowcase. 

Heat the transfer press up to 165°C (329°F). First, iron the pillowcase without adding the LaserFlex foil (yet) to create a flat, even surface.
Now, position the first LaserFlex strip on top of the textile and press for 17 seconds. Let the material cool completely before removing the transfer foil.
Repeat this process with all your design elements.
When all the foils have been ironed onto the textile, place the finished iron slip inside the transfer press using the same laser parameters to smooth out the layers.