To start you can either create your own design or use or ready made template. Send the individual graphics to your laser machine using the following paremeters. We have already inverted the graphic.

Tip:

JobControl allows you to easily convert your graphics using the printer driver. In the case of complex designs it can be beneficial to invert them prior to sending to the laser.

Print settings

Select the parameters from the material database. Parameters may be different depending on your chosen laser machine and available laser power.

Laser Parameters

Once the designs have been laser cut it's time to iron them onto your pillowcase.
Heat the transfer press to 165° C (329° F). Iron the pillow case prior to applying the LaserFlex to make sure that the surface is flat.
Position the first LaserFlex on the case and press it for 17 seconds. Do not remove the transfer foil until the material is completely cool. 
Repeat this process for all design elements.
Once all foils have been ironed onto the case, put the finished iron slip into the transfer press and using the same parameters smooth the layers.