Inspection stickers out of TroLase Foil

In this tutorial you will learn how to produce TroLase stickers that can be used for quality control or other purposes.

Inspection stickers out of TroLase Foil

In this tutorial you will learn how to produce TroLase stickers that can be used for quality control or other purposes.

In this tutorial, we will show you how to produce TroLase stickers that can be used for quality control and check-seals, among other things.

Preparation

You Will Need

1x sheet TroLase Lights
Material to cover the engraving table (spare paper)

Machine Used

Speedy 360, 70w
1.5" lens
Vacuum table with honeycomb cutting table

To create this sample, you can use any machine from the Speedy series of laser engravers.

Tip

TroLase Lights can be processed very easily, even with a fiber laser!

trotec-inspection-stickers.zip

ZIP

Download now

ZIP

Download now

Step by step

Step 1

Step 1: Import Design

Create your own design, or feel free to import the template we have provided. If you have used our design, remember to adapt it to your requirements. Once you're ready, send the job to the laser machine using the following driver settings.

Print Settings:

Process Mode	Resolution	Cut Line
Standard	600dpi	None

Halftone	Others
Colour	Optimised Geometries, Inner Geometries First

Step 2

Step 2: Engraving - TroLase Lights

Place the TroLase Lights into your laser engraving machine and cover the rest of the engraving table with something like spare paper. This will maximise the vacuum effect. Once you are ready, start the engraving, working from the bottom and moving upwards. This will help prevent dust from settling on and smudging the engraved areas. Remember: the parameters may differ depending on what machine you are using and its available laser power.

LASER PARAMETERS

Process	Colour	Process	Power (%)	Speed (%)
Engraving	Black	Engrave CO₂	60	80
Scratching	Red	Cut CO₂	10	1.5
Cutting	Blue	Cut CO₂	40	2

ppi/Hz	Passes	Air Assist	Z-Offset	Advanced
600	1	ON	+0.5mm	High Quality
1000	1	ON	-	-
1000	1	ON	-	-

Info:

When kiss-cutting, you only cut through the top layer of the sticker material, leaving the back layer intact. This will allow the stickers to be easily peeled and removed without the risk of damage.

Step 3

Step 3: Cleaning & Assembly

Cleaning the material is easy - we suggest using a simple damp cloth. Make sure you leave the material in the machine with the vacuum on to make this cleaning process easier on your or your team.

Inspiration

Try using two contrasting colours of TroLase Lights to produce counterpart stickers that can be used for 'unreleased' items.
You can easily adapt the graphics to suit your requirements, and even individualise the items.

Speedy series
The ideal laser engraver and cutter for personalisation.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.