Keamanan laser - Kelas keamanan internasional

Lingkungan produksi yang aman dengan Mesin Laser Trotec

Mesin laser dibagi menjadi kelas-kelas yang berlaku internasional berdasarkan kinerja dan risiko cedera mata dan kulit yang terhubung dengannya: Kelas 1 menawarkan keamanan tertinggi. Dengan laser kelas 4, radiasi laser dapat dipancarkan. Penggunaan peralatan pelindung (mis. kacamata pelindung) diperlukan di sini. Mesin Laser Trotec mengandung sumber laser CO₂ atau fiber, atau sumber laser keduanya dalam sistem Speedy flexx.

How safe are Trotec laser machines?

By means of the closed design of the Trotec lasers, the laser user is optimally protected. This concept additionally allows for rapid and efficient extraction of dust and gas. The closed Trotec flatbed laser machines belong to laser class 2. Why only laser class 2? Laser pointers are built into Trotec lasers, in order to show the user where the laser impinges the material. According to the internationally valid standard, laser pointers with an output of less than one milliwatt belong to laser class 2.

Except laser machines with laser class 4

If the Trotec laser plotter is equipped with a hatch, the chassis has an opening through which the laser radiation can exit. Such laser machines thus fall into laser class 4. A similar situation results with Trotec lasers with galvo technology. The laser must be classified into laser class 4 if it doesn't have a corresponding housing. Lasers of the safety class 4 may then only be operated with special protective gear (protective glass, shields, protection goggles).

Klasifikasi kelas keamanan laser:

Mesin laser kelas 1:

Radiasi laser yang dapat diakses dari kelas ini tidak berbahaya - bahkan dengan radiasi yang berkepanjangan, atau laser ditempatkan dalam cara yang tahan radiasi..

Mesin laser kelas 2:

Ini terdiri dari laser yang terlihat (mis. penunjuk laser dengan keluaran di bawah 1mW), yang hanya aman untuk mata dengan radiasi jangka pendek di bawah 0,25 detik.

Mesin laser kelas 3:

Radiasi laser yang dapat diakses dalam hal apa pun berbahaya bagi mata. Harap perhatikan juga pantulannya (mis. pada permukaan bahan yang reflektif). Trotec tidak memiliki sistem laser dengan laser kelas 3.

Mesin laser kelas 4:

Di sini, kerusakan mata dan kulit dapat disebabkan atau kebakaran dapat dipicu dalam zona bahaya laser. Dengan laser kelas ini, pengguna berkewajiban untuk sepenuhnya mematuhi ketentuan perlindungan.

Which safety class do the individual Trotec laser machines have?

Speedy

Product overview	Laser type	Safety class	Protective measures necessary
Speedy 50, 100, Speeedy 300, Speedy 360	CO₂	2	no
Speedy 300 flexx, Speedy 360 flexx	CO₂ and fiber	2	no
Speedy 400 *	CO₂	2	no
Speedy 400 flexx*	CO₂ and fiber	2	no
SP500*	CO₂	2	no
*if the laser is equipped with an optional hatch		4	yes

SpeedMarker

Product overview	Laser type	Safety class	Protective measures necessary
SpeedMarker 50	fiber	4	yes
SpeedMarker 300*	fiber	2	no
SpeedMarker 700	CO₂	2	no
SpeedMarker 700	fiber	2	no
SpeedMarker 1300, SpeedMarker 1350, SpeedMarker 1600	fiber	2	no
*if the laser is equipped with an optional hatch		4	yes

Which protective devices does a Trotec laser have?

All Trotec laser machines are CE-compliant and thus meet the essential safety and health requirements of the EC Machinery Directive 2006/42/EC. Here you will find an overview of machine-specific safety and protection devices, which make our lasers one of the safest in their class all over the world.

Interlock safety switch

Cladding elements, side covers/front hood and the protective cover serve as protection for the laser. These covers are fitted with interlock safety switches. If the protective cover or another interlock-secured cover is opened, a signal sounds and the laser machine immediately interrupts the laser process. Thus ensuring maximum safety for the user at all times.

Protective cover

For all closed laser systems, e.g.: Speedy Laser Engraver series the acrylic cover provides extensive protection from the laser light. Depending on the laser source, different protective covers are used. For example, laser machines with a CO₂ laser source have a blue acrylic cover, while machines with a fiber laser source have a green cover. Due to the coloring of the acrylic glass, the laser light is completely absorbed, thus providing extensive protection for the laser user.

Temperature sensor with warning signal

Some materials (e.g. acrylic) tend to flame, especially during laser cutting. The specially developed temperature sensor alerts the laser user when the temperature in the work area exceeds a critical value. The operator can react instantly to the acoustic warning signal and interrupt the laser process. Nevertheless, laser machines should never be left operating unattended.

Safety switch for immediate interruption of the power supply

In a dangerous situation, the power supply can be interrupted by means of various safety switches and buttons. The laser process is immediately stopped.

Main switch: Main power supply is disconnected
Key switch: Motor, laser source and electronics are de-energized
Emergency stop button: Electric circuit is interrupted, the laser beam and all movements are stopped

Karena keperluan masing-masing orang berbeda, mereka memerlukan saran yang berbeda! ?
Kami akan memberi Anda saran secara gratis.

Hubungi kami