Acrylic Place Card Zebra
Kako biste pregledali naš cijeli raspon materijala, posjetite www.trotec-materials.com
Priprema
Potrebni materijal:
- 3 mm TroGlass Color Gloss black (dostupna u Trotecu)
- Materijal za pokrivanje stola za graviranje (npr. papir)
Korišteni stroj:
- Speedy 360 flexx
- 80 vata CO2/20 vata fiber laser with 2.85" flexx leća
For this sample you should use any laser machine from the Speedy flexx serija.
Važno:
- Koristite akrilni rešetkasti stol za rezanje
- Leave the protective foil on the back of the material during cutting. It protects the acrylic from scratches.
Korak po korak
Korak 1
1. korak: Uvezi / stvori predložak dizajna
Import our design template into your graphic program, add the names, and then send it to your laser.
Postavke ispisa
Način obrade | Rezolucija | Rezna linija |
---|---|---|
Standard | 333 dpi | nijedna |
Poluton | Drugo |
---|---|
Boja | enhance geometries |
Korak 2
2. korak: Laserska obrada
For best results, we recommend using the akrilni rešetkasti stol za rezanje. It avoids back reflections on the material. Position the acrylic sheet into your laser and cover the rest of the table to maximize the exhaust power. Mark and cut the design out of TroGlass.
Parametri lasera:
Boja | Proces | Snaga (%) | Brzina (%) | ppi/Hz |
---|---|---|---|---|
Crna | graviranje FLP | 74 | 40 | 75000 |
Crvena | rezanje CO2 | 85 | 0.5 | 20000 |
Prolazi | Air Assist | Z-Offset | Napredno |
---|---|---|---|
1 | off | - | - |
1 | uključeno | - | - |
Info:
- The 2.85" flexx lens has a lower intensity on the material than the 2" lens. This is why we haven't used the standard laser parameters for TroGlass.
Korak 3
3. korak: Naknadna obrada
Clean the surface with a soft cloth and put the zebra into the base stand.
Inspiracija
On dark acrylic you can achieve particularly good results with the fiber laser source of the Speedy flexx.