Acrylic Place Card Zebra
Individual place cards can create a lasting memory of a successful party.
Acrylic Place Card Zebra
Individual place cards can create a lasting memory of a successful party.
To browse our full materials range, please visit www.trotec-materials.com
Preparation
Materials
- TroGlass Color Gloss, Black (1/8")
- Material to cover the engraving table (e.g., paper sheets)
Explore the complete Trotec materials range at www.engraving-supplies.ca.
Trotec Laser
You can use any laser machine from the Speedy Flexx series to complete this DIY project.
Tip
- Use the Acrylic Cutting Grid Table
- Leave the protective film on the back of the acrylic since it protects the material from scratches
Step by step
Step 1: Download and Edit the Template
Download our template and open it in your graphic design program. Edit the template by adding your guests' names to the name stands.
Once the file is ready for processing, send the job to your laser using the settings specified below.
JobControl® Settings
Process mode | Resolution | Cut line |
---|---|---|
Standard | 333 dpi | none |
Halftone | Others |
---|---|
Color | enhance geometries |
Step 2: Laser Process the TroGlass Color Gloss Sheet
Position the TroGlass Color Gloss acrylic sheet on your laser's work area. Next, cover the remaining laser bed space (e.g., with paper) to maximize the system's suction power on the acrylic.
Afterwards, proceed to engrave and cut the name stands.
For high-quality results, we recommend using the Acrylic Cutting Grid Table. This laser accessory minimizes the laser beam reflecting onto the material.
Laser Parameters:
Color | Process | Power (%) | Speed (%) | ppi/Hz |
---|---|---|---|---|
black | engrave FLP | 74 | 40 | 75000 |
red | cut CO2 | 85 | 0.5 | 20000 |
Passes | Air Assist | Z-Offset | Advanced |
---|---|---|---|
1 | off | - | - |
1 | on | - | - |
TIP
The 2.85" Flexx lens creates a lower-intensity beam than does the 2" lens. This is why we did not use the standard TroGlass processing parameters.
Step 3: Clean and Assemble the Name Stands
Clean each component with a soft cloth and assemble the name stands (insert the zebra cutouts into the base stands).
Inspirations
- Experiment with different object designs, such as handbag or car silhouettes, to match your event's theme
- Try multiple acrylic colours and textures from Trotec's collection
- Engrave a message or fun fact on the reverse side of each name stand