Acrylic Valentines Day Necklace Charms

Creating beautiful glass edges when cutting acrylic - Using laser tape and a acrylic cutting grid table will help to create a nice down draft. Having a good down draft is important for creating beautiful glass edges when cutting acrylic.

Preparation

Required material

1 sheet of 3mm thick acrylic
Laser tape
Necklace chain
6mm jump rings
Needle nose pliers

Engraving materials available at Trotec, browse product range:
shop.troteclaser.com

Machine used

Speedy 400
120 watt
2.0" lens
acrylic cutting grid table

For this sample you can use any laser machine from the Speedy laser engraver series or SP laser cutter series.

Important

We used cast acrylic.
We choose a darker colored acrylic for a more elegant look.
When creating a glass edge it is important to have a nice down draft. Which makes laser tape (painter tape) an important tool to have.

Valentines Day Necklace Charms

ZIP

Download now

ZIP

Download now

Step by step

Step 1

Step 1: Import /create design template

When creating a necklace charm you are more than welcomed to use our file templet or create your own beautiful necklace charms. The laser parameters that are give might vary depending on material used.

Print settings:

Process mode	Resolution	Cut line
Standard	500dpi	None

Halftone	Other
Color	None

laser cut acrylic with arcylic cutting grid table

Step 2

Step 2: Laser process

Use the acrylic cutting grid table for laser cutting acryl. Place the material onto your laser and seal off the rest of the laser table with tape. This will increase the exhaust power creating a better down draft.

Find more tips for acrylic processing

Laser parameters:

Color	Process	Power (%)	Speed (%)	ppi/Hz
Red	Cutting CO₂	90	0.4	5000

Passes	Air Assist	Z-Offset	Advanced
1	ON	-	-

Info:

We used the standard laser parameters from JobControl^® optimized for speed. The material parameters of JobControl can be downloaded from www.troteclaser.com