Acrylic Valentines Day Necklace Charms
Creating beautiful glass edges when cutting acrylic - Using laser tape and a acrylic cutting grid table will help to create a nice down draft. Having a good down draft is important for creating beautiful glass edges when cutting acrylic.
Preparation
Required material
- 1 sheet of 3mm thick acrylic
- Laser tape
- Necklace chain
- 6mm jump rings
- Needle nose pliers
You can purchase a wide range of different laser acrylics from our engraving supplies webshop.
Machine used
- Speedy 400
- 120 watt
- 2.0" lens
- Acrylic cutting grid table
To create these charms you can also use other Speedy Laser engraving machines or SP laser cutting machines.
Important
- In this sample we used cast acrylic.
- To create a more elegant look, we chose a darker coloured acrylic.
- When creating a glass edge it is important to have a nice down draft. Which makes laser tape (painter tape) an important tool to have.
Step by step
Step 1: Import /create design template
When creating your necklace charm you can use our template or create your own stunning design. Please not that the parameters will differ depending on your laser machine, available power and the chosen material.
Print settings:
Process mode | Resolution | Cut line |
---|---|---|
Standard | 500dpi | None |
Halftone | Other |
---|---|
Colour | None |
Step 2: Laser process
As mentioned we recommend using the acrylic cutting grid table for laser cutting acrylic. Place the material onto your laser and seal off the rest of the laser table with tape. This will increase the exhaust power creating a better down draft.
Laser parameters:
Colour | Process | Power (%) | Speed (%) | ppi/Hz |
---|---|---|---|---|
Red | Cutting CO2 | 90 | 0.4 | 5000 |
Passes | Air Assist | Z-Offset | Advanced |
---|---|---|---|
1 | ON | - | - |
Info:
- For this application we used the standard laser parameters from JobControl® optimised for speed. The material parameters for JobControl can be downloaded from www.troteclaser.co.uk
Step 3: Post-processing
Insert the split rings into the eyelets provided and attach the chains to them.
Inspiration
Our range of TroGlass acrylic features a wide range of colours, transparencies and finishes, allowing you to be as creative as you like with your designs.