--------------------------
diy fridge magnet 2

Guitar magnet

In only a few steps you can make this veneer wood magnet.

Preparation

Used material
  • 1 sheet wood veneer oak 3 mm
  • magnet foil approx. 20 x 35 mm or round magnet
Machine used
  • Speedy 360, 80 watts
  • 2" lens
  • Nozzle with small hole
  • Honeycomb cutting tabletop

For this application sample you can use any laser machine from the Speedy series.

Guitar Magnet

ZIP

Download now

Step by step

diy fridge magnet 3
Step 1

Step 1: Import the design file

Create a design of your own or use our template provided. Send it to the laser with the recommended laser parameters listed.

Print settings:

Process mode Resolution Cut line
Standard 500 dpi none
Halftone Others
Color enhanced geometries, inner geometries first
laser cutting wood veneer magnet
Step 2

Step 2: Laser process wood

Place the veneer sheet on the honeycomb cutting table in your laser. Position the material and then cover the rest of the work area to form a more powerful vacuum.

Job parameters may vary depending on the laser machine used and the laser power available.

Laser Parameters:

Process Color Process  Power (%) Speed (%) Ppi/Hz
Engraving Black Engrave CO2 70 50 500
Engraving Blue Engrave CO2 50 50 500
Engraving Cyan Engrave CO2 70 50 500
Cutting Red Cut CO2 100 1 1000
Passes Air Assist Z-Offset Direction Advanced
1 ON 6 mm Top down HQ
1 ON 1 mm Top down HQ
1 ON 3 mm Top down HQ
1 - - - -
assemble wooden magnet
Step 3

Step 3: Assemble the magnet

Remove the guitar from the laser and glue the magnetic foil to the backside.

diy fridge magnet 2

One of the popular wood species: oak

For an application like this one, we recommend our varnished oak veneer panel. The veneered oak panel can be utilized for a variety of applications such as signs, gifts, architectural models, and handicrafts. Experiment with different laser settings or types of wood, and create a variety of different guitar models!

Speedy series
The ideal laser engraver and cutter for personalization.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo