Christmas tree with decorations

This unique Christmas tree is an eye-catcher for a lobby, shops or in your home. (Find engraving materials for this and other applications at: www.trotec-materials.com.)

Preparation

Required material

3 sheets of 3mm TroGlass 1200mm x 600mm (Any color can be used. For the decoration you can use remaining material)
String or fishing line to hang decorations

Machine used

SP500
60 Watt
3.75" lens
Slat cutting table or Acrylic cutting grid table

For this sample we recommend using any laser machine from the SP laser cutter series.

Important

Each laser machine is unique, so you may have to adjust the slots to suit the lens you are using to get a nice friction fit.

xmas-tree-decoration.zip

ZIP

Download now

ZIP

Download now

csm_Xmas-tree-Troglass_3c3a81852c.png

PDF

Download now

PDF

Download now

Step by step

Step 1

Step 1: Import /create design template

Make your own design or import our template. Send it to the laser with the recommended laser parameters. The parameters might vary depending on the machine used and the available laser power.

Print settings:

Process mode	Resolution	Cut line
Standard	500 dpi	None

Halftone	Others
Black & White	Enhanced Geometries Inner - Geometries First

Step 2

Step 2: Laser process

Position the material into your laser and cover the rest of the table to increase the exhaust power. You will need 6 side parts (2 on each sheet) and 4 disks. Remove the protective foil after the cutting is complete.

Laser Parameters:

Color	Process	Power (%)	Speed (%)	ppi/Hz
red	Cutting CO₂	100%	0.65	10,000

Passes	Air Assist	Z-Offset	Advanced
1	on	-	-

Info:

The material parameters of JobControl can be downloaded from www.troteclaser.com

Step 3

Step 3: Post-processing

To assemble the Christmas tree, friction fit each section into the discs. Place the largest disc at the base. Note: the disc at the top of the tree is the one with two extra slots for securing the star on top of the tree.

Inspiration

Now you can put your ornaments on the tree. Or you can decorate it with individually produced TroGlass ornaments. Scroll down to the end of the page to view a large selection of designs.