Display inspirations made out of acrylic

Jewellery display

See how you can produce an individual jewelry display using different acrylic sheets.

Preparation

Required material

1/4 sheet TroGlass Clear 8 mm
1/4 sheet TroGlass Clear 5 mm
1/4 sheet TroGlass Satins Orange translucent with double-sided adhesive foil on both sides

Machine used

Speedy 400
120 Watt
2.5" lens
Acrylic lamella or vacuum table with acrylic grid or distance holders

This sample can be produced with any machine of Speedy family or SP series. For high-quality and efficient cutting of 8 mm acrylic you need laser power of 80 W or more.

Important

Remove the protection foil from top of the 5 mm and 8 mm acrylic before laser processing
Cover the rest of the working area for a better vacuum effect

jewelry-display.zip

ZIP

Download now

ZIP

Download now

Step by step

Step 1

Step 1: TroGlass Clear 8 mm

Import our design template into your graphic program. Send the job to your laser using the parameters mentioned below.

Print settings

Process mode	Resolution	Cut line
Standard	500 dpi	none

Halftone	Others
Color	enhanced geometries

Step 2

Step 2: Laser process TroGlass Clear 8 mm

Now make the parameter settings. Our recommendations can vary depending on the laser type and laser power.

Tips:

For an even better result, cut the shape first and engrave the design afterwards

Laser Parameters

Color	Process	Power (%)	Speed (%)	ppi/Hz
black	engrave CO₂	23	75	500
red	cut CO₂	95	15	20.000

Passes	Air Assist	Z-Offset	Advanced (plate set up)
1	on	-	Engraving direction from bottom
1	on	-2.5 mm	-

Step 3

Step 3: TroGlass Clear 5 mm

Import our design template into your graphic program. Send the job to your laser using the parameters mentioned below.

Print settings

Process mode	Resolution	Cut line
Standard	500 dpi	none

Halftone	Others
Color	enhanced geometries

Step 4

Step 4: Laser process TroGlass Clear 5 mm

Now make the parameter settings. Our recommendations can vary depending on the laser type and laser power.

Laser Parameters

Color	Process	Power (%)	Speed (%)	ppi/Hz
red	cut CO₂	50	0.2	20.000

Passes	Air Assist	Z-Offset	Advanced
1	on	-1.5 mm	-

Info:

We used the JobControl^® standard parameters optimized for quality
The material parameters of JobControl^® can be downloaded from www.troteclaser.com

Step 5

Step 5: TroGlass Satins

Import our design template into your graphic program. Send the job to your laser using the parameters mentioned below.

Print settings

Process mode	Resolution	Cut line
Standard	500 dpi	none

Halftone	Others
Color	enhanced geometries

Step 6

Step 6: Laser process TroGlass Satins

Now make the parameter settings. Our recommendations can vary depending on the laser type and laser power.

Laser Parameters

Color	Process	Power (%)	Speed (%)	ppi/Hz
red	cut CO2	30	0.2	20 kHz

Passes	Air Assist	Z-Offset	Advanced
1	on	-	-

Info:

We used the JobControl® standard parameters optimized for quality
The material parameters of JobControl® can be downloaded from www.troteclaser.com

Step 7

Step 7: Post-processing and assembly

To assemble the parts, first glue the colored acrylic parts on the 5 mm clear acrylic. Make sure that the pieces are exactly positioned above each other. Next position the 8 mm acrylic part with the engraving inside on the colored parts. By doing this the engraving is protected.

Inspirations

For an even more individual presentation of your jewelry, use displays in other shapes, material thicknesses and material combinations. If you are using only few thin acrylic sheets, cut a base to let the display stand stable.

Speedy series
The ideal laser engraver and cutter for personalization.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.