--------------------------
Display inspirations made out of acrylic

Jewellery display

See how you can produce an individual jewellery display using different acrylic sheets.

Display inspirations made out of acrylic

Jewellery display

See how you can produce an individual jewellery display using different acrylic sheets.

Create a unique jewellery display using different TroGlass acrylic sheets. TroGlass is available to purchase from our engraving supplies webshop.

Preparation

Materials required
  • 1/4 sheet TroGlass Clear 8 mm
  • 1/4 sheet TroGlass Clear 5 mm
  • 1/4 sheet TroGlass Satins Orange translucent with double-sided adhesive foil on both sides

All of these materials are available from our engraving supplies webshop.

Laser machine used
  • Speedy 400, 120 Watt with a 2.5" lens
  • Acrylic lamella or vacuum table with acrylic grid or distance holders

Any Speedy family or SP series laser machine can be used to create this display. To achieve a high-quality result and efficiently cut 8mm acrylic you need a laser power of 80W or more.

Important information
  • Remove the protective foil from the top of both the 5mm and 8mm acrylic prior to laser cutting and engraving
  • Cover the rest of the working area with a suitable material (such as paper) to improve extraction
jewelry-display.zip

ZIP

Download now

Step by step

Acrylic laser cutting: TroGlass clear
Step 1

Step 1: TroGlass Clear 8 mm

Start by importing your design or our template into your graphic program and send the job to the laser using the below parameters.

Print settings

Process mode Resolution Cut line
Standard 500 dpi none
Halftone Others
Color enhanced geometries
Laser engraving TroGlass Clear
Step 2

Step 2: Laser cutting and engraving: TroGlass Clear 8 mm

Select the parameters for the job. These can vary depending on your laser machine and available laser power.

Tips:

For a better result laser cut the acrylic before laser engraving.

Laser Parameters

Color Process Power (%) Speed (%) ppi/Hz
black engrave CO2 23 75 500
red cut CO2 95 15 20.000
Passes Air Assist Z-Offset Advanced (plate set up)
1 on - Engraving direction from bottom
1 on -2.5 mm -
Laser processing acrylic
Step 3

Step 3: TroGlass Clear 5 mm

Import our template or your own design into the graphic program and send the job to the laser using the following parameters:

Print settings

Process mode Resolution Cut line
Standard 500 dpi none
Halftone Others
Color enhanced geometries
Laser cut acrylic components for display
Step 4

Step 4: Laser cutting: TroGlass Clear 5 mm

Select the parameters which vary depending on your laser machine and its available power.

Laser Parameters

Color Process Power (%) Speed (%) ppi/Hz
red cut CO2 50 0.2 20.000
Passes Air Assist  Z-Offset Advanced
1 on -1.5 mm -

Information:

  • In this example we used the quality parameters from JobControl®
  • You can download JobControl® parameters from www.troteclaser.co.uk
Assembling the jewellery display
Step 5

Step 5: TroGlass Satins

In your graphic program load the template and send it to the laser using the below parameters:

Print settings

Process mode Resolution Cut line
Standard 500 dpi none
Halftone Others
Color enhanced geometries
Gluing acrylic sheets together.jpg
Step 6

Step 6: Laser cutting TroGlass Satins

Select your parameters for laser cutting, which can vary depending on laser machine and laser power available. 

Laser Parameters

Color Process Power (%) Speed (%) ppi/Hz
red cut CO2 30 0.2 20 kHz
Passes Air Assist Z-Offset  Advanced
1 on - -

Info:

  • We used the standard JobControl® parameters optimised for quality
  • Material parameters for JobControl® are available at www.troteclaser.co.uk
  •  
Completed acrylic jewellery display
Step 7

Step 7: Post-processing and assembly

When assembling your display begin by gluing the coloured TroGlass Satin components to the 5mm clear acrylic, ensuring that the pieces are positioned exactly above each other.

The next step is to position the engraved 8 mm acrylic. To protect your laser engraved design position the engraved side onto the coloured acrylic.

Inspirations

For an even more individual presentation of your jewellery, use displays in other shapes, material thicknesses and material combinations. If you are using only few thin acrylic sheets, cut a base to let the display stand stable.

Speedy series
The ideal laser engraver and cutter for personalisation.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo