--------------------------

Bottle display made of printed TroGlass XT

Create an original bottle display from TroGlass XT. Extruded acrylic has a constant material thickness and is therefore suitable for applications where parts have to be put together.

Bottle display made of printed TroGlass XT

Create an original bottle display from TroGlass XT. Extruded acrylic has a constant material thickness and is therefore suitable for applications where parts have to be put together.

Preparation

Material used
  • 3mm TroGlass XT
Laser machine used
  • Speedy 360
  • 80 watts
  • 2" lens
  • white acrylic gutting grid

This sample can be created using the Speedy 300 and Speedy 400 laser engraver with the JobControl® Vision software.

Copyright notice

This template may not be used for products for resale or other distribution. If you intend to do so, you must purchase your own iStock license "Pineapple" and "Pineapple pieces". We assume no liability for illegal actions. 

Acrylic Bottle Display

ZIP

Download now

Step by step

Step 1

Step 1: Import graphic files and print

Start by importing our template and adapting it to your requirements. We printed the design to the back of the acrylic using a UV-printer. Using the registration marks the JobControl Vision camera system will recognise the position and cut precisely along the contour.

Step 2

Step 2: Design acrylic

Next import our template and adapt it to your requirements. Prior to drawing the final connections measure the kerf. For this make a test cut with a suitable parameter and lens. TroGlass XT features a consistent material thickness, allowing you to transfer the testing results to all future designs when using the same laser settings.
Send the job to the laser using the driver settings below.

Print settings:

Process mode Resolution Cut line
Vector Job 500dpi none
Halftone Others
- Optimised Geometries, inner geometries first
Step 3

Step 3: Laser cutting

The following laser parameters will vary depending on your laser machine and the available laser power.

Laser parameters:

Colour Process Power (%) Speed (%) ppi/Hz
red Cut CO2 70 0.4 15.000
Passes Air Assist z-Offset Direction Advanced
1 ON - - -
Step 4

Step 4: Assembly

The final step is to assemble your display, and it is ready to go. 

TroGlass XT - New extruded acrylic from Trotec

TroGlass XT is the perfect product for model makers, interior and exterior designers, and signage and display manufacturers among others.
A transparent, extruded acrylic, TroGlass XT offers fantastic light transmission, excellent resistance to outdoor weathering, and low thickness tolerance.

Visit our webshop today to find out more and order TroGlass XT.

Purchase TroGlass XT

Speedy series
The ideal laser engraver and cutter for personalisation.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo