Wooden beard combs

The designer Andrei Bulai, who proudly owns a full beard, has created these fantastic beard combs with Trotec wood. This simple tutorial also includes the graphic file for download and the parameters to be used.

Preparation

Required material

1/8" MDF Trotec wood, available here
You can also use any material to cover the the work table (ex. paper)

Machine used

Speedy 360, 100 Watt
2" lens
honeycomb table

Tips

Once the material is place on the work table, cover the rest of the area with sheets of paper to garantee the best air draft.
The lens recommended is a 2'' lens, for a clean and fast cut

Wooden Beard Combs

PDF

Download now

PDF

Download now

Step by step

Step 1

Step 1: Make design layout

The first step is to download the comb template. You can choose from three different options, and you can adapt the size of the comb based on the beard size! After deciding the design and size, you will place the wood on the table and cover the rest of it with another material (ex. paper), to guarantee good suction.

Print settings:

Process mode	Resolution	Cut line
Standard	500 dpi	none

Halftone	Others
Color	enhanced geometries, inner geometries first

Step 2

Step 2: Engraving process

Adjust the parameter settings. The right settings can differ depending on the laser machine used and laser power available.

LASER PARAMETERS

Color	Process	Power (%)	Speed (%)	ppi/Hz
black	engrave CO2	55	50	500
red	cut CO2	100	1.8	1000

Passes	Air Assist	Z-Offset	Advanced
1	on	6 mm	-
1	on	-	-

Step 3

Step 3: Post-processing

Once you are done cutting and engraving the comb, remove your product from the table carefully so that none of the thinner pieces break. Clean the comb with a cloth and your comb is ready!

Speedy series
The ideal laser engraver and cutter for personalization.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.