Inspiration lasercut Mother's Day bouquet

Decorative Mother's Day bouquet made of TroGlass and wood veneer

Learn how you can produce a decorative and extraordinary Mother's Day gift.

Decorative Mother's Day bouquet made of TroGlass and wood veneer

Learn how you can produce a decorative and extraordinary Mother's Day gift.

Preparation

Required material

1 sheet solid wood walnut
1 sheet wood veneer maple
1/4 sheet TroGlass Color Gloss green transparent
1/4 sheet TroGlass clear
Optional:
Hot air gun
Bench vice
Work gloves

Machine used

Speedy 400 flexx, 100 watts
2" lens or 2.5" lens for TroGlass Clear 10mm
vacuum table with honeycomb cutting table resp. acrylic grid

Any laser machine from the Speedy laser engraver series can be used for this DIY.

Tip

Leftover material can be used to make the "blossoms."

flowerbouquet-mothersday.zip

ZIP

Download now

ZIP

Download now

Step by step

Step 1

Step 1: Import design

Create a design or use our own files. Change it to meet your needs. Send the laser cutting job for the base plate to the laser with the following driver settings.

Print settings:

Process mode	Resolution	Cut line
Cut Job	1000 dpi	none

Halftone	Others
Color	Optimized geometries, inner geometries first

Step 2

Step 2: Cutting base plate

Place the sheet of TroGlass Clear on the acrylic cutting grid of your laser and insert the 2.5" lens. Next, cut the base with the settings below. These settings may change depending on which laser machine you use and the power available.

Laser Parameters Cutting

Color	Process	Power (%)	Speed (%)	ppi/Hz
red	Cut CO2	95	0.2	20000

Passes	Air Assist	Z-Offset	Advanced
1	on	-3 mm	-

Info:

We use the standard settings for TroGlass Clear (speed optimized) from JobControl^®.

Step 3

Step 3: Design "grass"

Send the file for the grass to the laser machine with the following settings.

Print settings:

Process mode	Resolution	Cut line
Standard	500 dpi	none

Halftone	Others
Color	Optimized geometries

Step 4

Step 4: Laser process "grass"

Place the dark green transparent TroGlass on the acrylic cutting grid for your laser. For this step and all following steps, use the 2" lens in your laser. Use the following settings to engrave and cut the grass design. These settings may change depending on the laser machine you use and the power available.

Laser parameters

Process	Color	Process	Power (%)	Speed (%)
Engraving	black	Engrave CO₂	14	20
Cutting	red	Cut CO₂	100	1

ppi/Hz	Passes	Air Assist	Z-Offset	Advanced
500	1	on	0mm	High Quality
1000	1	on	-	-

Tip:

Begin engraving from the bottom of the workpiece so that dust doesn't settle on the engraving.

Step 5

Step 5: Design "Stem"

Next, we send the design for the solid wooden stem to the laser with the following print settings.

Print settings:

Process mode	Resolution	Cut line
Cut Job	1000 dpi	none

Halftone	Others
-	Optimized geometries

Step 6

Step 6: Laser process "Stem"

Switch the acrylic cutting grid with the honeycomb cutting table and place the walnut sheet on it. Maximize the vacuum suction by covering the rest of the engraving area. Then, cut the material with the following settings:

Laser Parameters Cutting

Color	Process	Power (%)	Speed (%)	ppi/Hz
red	Cut CO2	100	1	1000

Passes	Air Assist	Z-Offset	Advanced
1	on	-	-

Tip:

When you cover the engraving area, a vacuum is created which is important to get a clean, even cut.

Step 7

Step 7: Design "Blossoms"

Then send the design for the abstract blossoms to your laser machine.

Print settings:

Process mode	Resolution	Cut line
Cut Job	1000 dpi	none

Halftone	Others
-	Optimized Geometries, Inner Geometries first

Step 8

Step 8: Laser process "Blossoms"

Place the maple veneer sheet within the laser and carefully cover the rest of the engraving table to make a vacuum. Then use the settings below to cut the blossoms:

Laser Parameters Cutting

Color	Process	Power (%)	Speed (%)	ppi/Hz
red	Cut CO₂	100	1.2	1000

Passes	Air Assist	Z-Offset	Advanced
1	on	-	-

Tip:

If you cut the whole sheet, focus on the middle of the material to account for any changes in thickness.

Step 9

Step 9: Assembly

Place the stem inside the base and dress it up with the blossoms. Feel free to mix in both big and small blossoms. Lastly, put the grass inside the base, and your creative Mother's Day bouquet is finished.

Handicraft tip:

Twisted blades of grass are an additional way to catch someone's attention. To make these, place the blades of grass in a bench vice or other heat-resistant grip. Use a hot air gun to carefully heat the filigree grass, then manipulate and twist the heated acrylic. Make sure to wear gloves! Keep the acrylic in place until it is cooled. With a bit of practice, it's possible to get incredible objects.