Fire Evacuation Sign

Preparation

Required material:

TroLase Textures 1/16" in Yellow/Black, half or quarter sheet

Machine used:

Speedy 400 120W with 2" lens and aluminum cutting grid table

For this sample you only can use any laser engraver and cutter from the Speedy series.

Graphic files

ZIP

Download now

ZIP

Download now

Step by step

Step 1

Send job to laser

Create your own design or use our template. Now send the job to the laser with the settings below.

Print Settings

Process mode	Standard
Resolution	500dpi
Cut line	None
Halftone	Ordered Dithering
Others	Enhanced geometries, Inner geometries first

Step 2

Cut and engrave your sign

Create your own design or use our template. Send it to the laser with the recommended laser parameters. The parameters might vary depending on the machine used and the available laser power.

Laser Parameters

	Engraving	Cutting
Color	Black	Red
Process	Engrave	Cut
Power (%)	100	80
Speed (%)	40	2
ppi/HZ	Auto PPI	1000
Passes	1	1
Air Assist	ON	ON
Z-Offset	0.16	-
Direction	Top down	-
Path Planning	-	Standard
Advanced	Default	Default