Fire evacuation sign
Use Trotec's TroLase Textures to engrave this fire evacuation sign.
Fire evacuation sign
Use Trotec's TroLase Textures to engrave this fire evacuation sign.
Preparation
Required material:
- TroLase Textures 1/16" in Yellow/Black, half or quarter sheet
Machine used:
- Speedy 400 120W with 2" lens and aluminum cutting grid table
For this sample you only can use any laser engraver and cutter from the Speedy series.
Step by step
Sending job to the laser
Begin by either creating your own design or using our ready made template. You can now send the job to the laser using the below settings.
Print Settings
Process mode | Standard |
Resolution | 500dpi |
Cut line | None |
Halftone | Ordered Dithering |
Others | Enhanced geometries, Inner geometries first |
Laser cutting and laser engraving your sign
Send your design to the laser with the recommended laser parameters. Please note that these parameters may vary depending on the laser machine used and the available laser power.
Laser Parameters
Engraving | Cutting | |
---|---|---|
Color | Black | Red |
Process | Engrave | Cut |
Power (%) | 100 | 80 |
Speed (%) | 40 | 2 |
ppi/HZ | Auto PPI | 1000 |
Passes | 1 | 1 |
Air Assist | ON | ON |
Z-Offset | 0.16 | - |
Direction | Top down | - |
Path Planning | - | Standard |
Advanced | Default | Default |
Cleaning the finished sign
When laser processing is finished wipe down your finished sign with Hexanes or other suitable cleaner to remove any leftover residue. Your sign is now complete and ready to be hung!