Laser Engraving Denim

Denim is an ideal material for creating unique, detailed textile applications. Laser processing denim of darker shades can result in a high-contrast engraving and create a “bleached” effect. Additionally, denim engraving requires little to no post-processing, saving you time and money.

Depending on the length, the garment can also be produced with another machine from the Speedy laser engraver series.

Step 1: Measure your material

Position your denim into the laser machine. If the garment is too large for the working area, fold it into sections. Be mindful that the material is not bunched to a height where the laser head would make contact with it.

Step 2: Secure your garment

An even surface area is essential for achieving optimal results for laser engraving and marking applications. Flatten your material as much as possible, and iron any wrinkles or lines if necessary. Once you've reached the desired surface level, secure your garment in place. With Trotec's multifunctional table concept, there are multiple options to ensure your application stays flat while processing. Use magnets to fasten your item to the ferromagnetic table option, or the vacuum table that fixes applications to the working table using a light vacuum. To increase this effect, block off the unused portion of the working area to create a stronger down-draft.

If you are unable to flatten your material with the methods listed above, compensate for the irregularity and unevenness by utilizing a longer focal lens or or by moving the laser out of focus.

Step 3: Processing

Keep in mind direct textile engraving compromises the integrity of the material. Start with a lower power setting and increase as needed. Our suggested parameters may vary depending on the laser machine used and the available laser power.

Determine your optimal laser parameters

Video tutorial

The video below shows the engraving process and includes the laser parameters used for this job. Our suggested parameters may vary depending on the laser machine used and the available laser power.

Machine used: Speedy 360

120 Watt
2" lens
Power (%): 38.00
Speed (%): 100.00
ppi/Hz: 500
Air Assist: On
Z-Offset: 0.00

Do you need something else?

Show me a machine demo.

Request a web/on site demo.

Show me a machine demo.

Technical support

We help you solve your Trotec laser machine problems.

Technical support

Individual requirements require individual advice. We will be happy to help you find the perfect solutions.