--------------------------
champagne glass laser engraving

Laser engraved
wedding glass

Step by step guide

Priprema

Required material
  • rotary attachment
  • champagne glass
  • paper towel
  • a sponge or a spray and some water
Trotec laser used
  • Speedy 300
  • 80 watts
  • 2.0 inch lens
Tip

Use a 2 inch lens instead of a 1.5 inch lens to prevent cracking in the glass.

csm_wedding-glass_8ef591edeb.png

PDF

Preuzmite odmah

Detaljni vodič

champagne glass laser engraving
Korak 1

Step 1: Mount the rotary attachment

To mount the rotary attachment and plug it in, the laser has to be switched of. After that you can switch on the laser and put the prepared glass into the rotary attachment.

wedding glass laser engraving
Korak 2

Step 2: Prepare the glass

To prepare the glass you will need a paper towel, some water and a sponge or a spray. To prevent splintering of the glass, apply a paper towel on the surface and moisten it. The easiest way to this, is using a sponge or a spray. Pay attention that there are no air inclusions or wrinkles in order to get a perfect result.

laser software rotary engraving glass
Korak 3

Step 3: Put the glass into the rotary attachment

Put your prepared glass into the rotary attachment and make sure, that it is firmly attached. If your glass is conical, adjust the inclination angle until the surface you want to engrave is in a parallel position.

rotary engraving champagne glass
Korak 4

Step 4: Engrave your glass

Import the PDF file into Corel Draw, customize it as you want to or take your own design and send it to the laser. Make sure that you have activated the rotary attachment and entered the diameter of the glass in the properties dialog (see screenshot in the slideshow above).

Used engraving parameters:

Power: 100% - Speed: 60% - Frequency: 500 ppi - Air Assist: OFF

Serija Speedy
Idealan laserski graver i sekač za personalizaciju.

Otkrijte laserske gravere i sekače

Da li imate pitanja o aplikacijama ili podešavanjima?
Drago nam je što možemo da vam pružimo detaljne savete, od Air Assist-a do z-pomaka.

Kontaktirajte nas
Ponosni član troGROUP Logo