Laser engraved trophy label made of TroLase Foil

Persiapan

Required material

1/4 sheet TroLase foil silver brushed (or any other color of your choice)
Material to cover the engraving table

Machine used

Speedy 360 flexx, 80/30 Watt
2.85" lens
Vacuum table and honeycomb cutting table

You can produce this sample with any machine of the Speedy family (no fiber laser required).

Tips

We engraved this sample with the fiber laser, because the design is extremely intricate. Due to the smaller spot size of the fiber laser, we achieve better results. This works only on metallic TroLase foils (silver matt, silver brushed, gold, copper).

With the CO2 laser you can process all TroLase foil materials.

Trophy Label

ZIP

Unduh sekarang

ZIP

Unduh sekarang

Langkah demi Langkah

Langkah 1

Step 1: Import design

Make your own design or import our template. Adapt it to the size of your trophy if necessary. Then send the job to the laser using the driver settings below:

Process mode	Resolution	Cut line	Halftone	Others
Standard	1000 dpi	None	Color	-

Info: When engraving with the fiber laser, always use 1000 dpi resolution. It works best in combination with the small spot size of the fiber laser.

Langkah 2

Step 2: Laser process label

Put the TroLase foil into your laser and focus on the material. Then make the parameter settings. Our settings can vary depending on laser machine and laser power available.

Laser Parameters Engraving:

Color	Process	Power (%)	Speed (%)	ppi/Hz
Black	Engrave FLP	20	55	30,000

Passes	Air Assist	Z-Offset	Advanced
1	on	0mm	-

Laser Parameters Scratching:

Color	Process	Power (%)	Speed (%)	ppi/Hz
Red	Cut CO2	8	1	1000

Passes	Air Assist	Z-Offset	Advanced
1	On	4 mm	-

Laser Parameters Kiss-cut:

Color	Process	Power (%)	Speed (%)	ppi/Hz
Blue	Cut CO2	9	1	1,000

Passes	Air Assist	Z-Offset	Advanced
1	On	-	-

Laser Parameters Cutting:

Color	Process:	Power (%)	Speed (%)	ppi/Hz
Green	Cut CO2	40	2	1,000

Passes	Air Assist	Z-Offset	Advanced
1	On	-	-

Info:

The advantage of the fiber laser is the smaller spot size. Therefore less heat is applied on the material. The foil remains flat and does not bend.

Langkah 3

Step 3: Cleaning

Clean the label with a damp cloth. This works best inside the engraving cabinet with activated exhaust.

Inspiration

TroLase Foil is available in many colors. Browse our webshop and be inspired for your next application.

TroLase Foil can also be used for exterior use like mailbox labels or door bell name plates.

Seri Speedy
Pengukir dan pemotong laser yang ideal untuk personalisasi.

Temukan pengukir dan pemotong laser

Pertanyaan tentang aplikasi atau pengaturan?
Kami dengan senang hati akan memberikan saran kepada Anda mulai dari A untuk Air Assist hingga Z untuk z-offset.

Hubungi kami