Inspiration for laser cut christmas decoration

Laser Cut Holiday Decor: Wooden Christmas Tree with Acrylic Ornament

Create a unique Christmas decoration out of wood, complete with an acrylic bauble! Download your templates and instructions here, and be ready for the festive season.

Preparation

Laser cutting materials used

1 Sheet Solid Wood Walnut
1/4 Sheet TroGlass or TroGlitter
Hook for hanging the bauble

All laser cutting materials are available from our engraving supplies webshop.

Laser cutting machine used

Speedy 360
80 Watt
2" Lens
Honeycomb cutting table for wood
Acrylic cutting grid table for TroGlitter

Any Speedy laser cutting machine is suitable for creating this decoration.

Tip

You can experiment using different wood sheets and acrylics, allowing you to create bespoke products for customers.

Wooden Christmas Tree

ZIP

Download now

ZIP

Download now

Step by step

Step 1

Step 1: Design

Begin by creating your own design or use our template. Send the graphic to the laser with the following print settings:

Process mode	Resolution	Cut line
Standard	500dpi	None

Halftone	Others
Colour	Optimal geometries, inner geometries first

Tip:

In order for the tree to hold well after laser cutting the base plate, simply measure the thickness of the wooden plate in advance. As a guideline, you can start with a cutting gap of approximately 0.2mm when laser cutting with a 2inch lens.

Laser engraving wood for Christmas decoration

Step 2

Step 2: Laser cutting the stand

Now enter the parameter settings. These will vary depending on which machine you use and its available power.

Laser Parameters	Colour	Process	Power (%)	Speed (%)	ppi/Hz
Laser Engraving	Black	Engrave CO₂	50	50	500
Laser Cutting	Red	Cut CO₂	95	0.8	1000

Laser Parameters	Passes	Air Assist	Z-Offset	Direction	Advanced
Laser Engraving	1	On	+4mm	Down	-
Laser Cutting	1	On	-	-	-

Tip:

For more contrast in the engraving, lift the Z-Offset to about +4mm.

Laser cutting wood for the Christmas decoration

Step 3

Step 3: Bauble

When you are happy with your design, send it to the laser using the following settings.

Process mode	Resolution	Cut line
Standard	500dpi	None

Halftone	Others
Colour	Optimal geometries, inner geometries first

Christmas bauble made out of laser cut acrylic sheets

Step 4

Step 4: Laser process the bauble

Send the parameters for the bauble decoration to your laser machine. As before these settings will differ between laser machines and their available power.

Laser cutting parameters:

Colour	Process	Power (%)	Speed (%)	ppi/Hz
Red	Cut CO2	50	0.2	5000

Passes	Air Assist	Z-Offset	Direction	Advanced
1	On	0	-	-

Step 5

Step 5: Constructing the tree

Place the tree in the base plate, and hang the bauble with the hook from the tree branch. Your decoration is now ready for display!

What makes Trotec materials perfect for this application?

The engravable wood range from Trotec is specifically developed for laser cutting and engraving. Both the solid wood or real wood veneer panels, as well as our plywood and MDF materials, allow for fine engraving and a beautiful cut with the laser.

Coming soon: Our TroGlitter range of acrylics offer exciting, glittering surfaces, allowing you to create eye-catching products.