Import our designs into your graphic program and adapt it according to your requirements.

Download PDF files

Position the material on the laser table and cover the rest of the engraving area for optimum exhaust performance. Send the wood job  and then the four TroLase jobs to the laser machine.

LASER PARAMETERS WOOD:

500 dpi resolution
Cutting: 100% power, 0.7% speed, 1000 ppi, air assist on

LASER PARAMETERS TROLASE: 

500 dpi resolution
Engraving (black): 35% power, 30% speed, 600 ppi, air assist on, z-offset +1 mm, HQ mode (advanced material settings)
Cutting (red): 2.5% power, 0.5% speed, 1000 Hz, air assist on, z-offset +2 mm
Cutting (blue): 25% power, 2% speed, 1000 ppi, air assist on, z-offset  +2 mm
Cutting (cyan): 50% power, 2% speed, 1000 ppi, air assist on

TIPS:

Select the following options in JobControl® to get perfect cutting results.

• Optimised geometries
• Inner geometries first
• Engraving from bottom to top reduces the cleaning of the engraved and cut materials

Once you have finished the laser process, clean the TroLase material with water. Then use two binding screws to fix the calendar sheets and mount the calendar to a wall.