--------------------------
laser-cut-beard-comb

Wooden beard combs

The designer Andrei Bulai, who proudly owns a full beard, has created these fantastic beard combs with Trotec wood. This simple tutorial also includes the graphic file for download and the parameters to be used.

laser-cut-beard-comb

Wooden beard combs

The designer Andrei Bulai, who proudly owns a full beard, has created these fantastic beard combs with Trotec wood. This simple tutorial also includes the graphic file for download and the parameters to be used.

Looking for a stylish way to comb your beard? Designer Andrei Bulai, who proudly sports a full beard, has created these fantastic combs using Trotec wood. You can create them yourself by following this simple tutorial, which also includes the graphic file for download and the laser parameters used.

Laser cutting and engraving wood is a popular application. You can purchase MDF wood from our engraing supplies webshop. 

Preparation

Required material
  • 3 mm MDF 
  • A suiable material for covering the machine bed, such as paper
Machine used
Tips
  • Once the material is loaded onto the laser machine bed, cover the rest of the work surface with paper to ensure maximum suction
  • Use a 2'' lens that can make a clean, fast cut
Wooden Beard Combs

PDF

Download now

Step by step

Laser cut wooden beard combs
Step 1

Step 1: Make design layout

Start by downloading the comb template. There are three different designs and you can create depending on the beard size! Once the wood is placed on the work surface cover the rest of the surface with paper to ensure maximum suction.

Print settings:

Process mode Resolution Cut line
Standard 500 dpi none
Halftone Others
Colour  enhanced geometries, inner geometries first
Laser cutting: Three different wooden beard combs
Step 2

Step 2: Engraving process

Create the parameter settings. The recommended settings will be different depending on which laser machine you use and the laser power it has available.

LASER PARAMETERS

Colour Process Power (%) Speed (%) ppi/Hz
black engrave CO2 55 50 500
red cut CO2 100 1.8 1000
Passes Air Assist Z-Offset Advanced
1 on 6 mm -
1 on - -
laser-cut-beard-comb
Step 3

Step 3: Post-processing

Once the laser cutting and engraving process is completed you should carefully remove the comb from the rest of the wood. Make sure to take care so not to break the thinner pieces. Clean the comb with a damp cloth and voilà! Your beard comb is ready for action.

You can find advice for laser cutting and engraving wood on our dedicated application page. 

Speedy series
The ideal laser engraver and cutter for personalisation.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo