--------------------------
laser cut wooden calendar

Perpetual calendar of wood and engraving plastic

Follow instructions to get an individual perpetual calendar of wood and engraving plastic.

laser cut wooden calendar

Perpetual calendar of wood and engraving plastic

Follow instructions to get an individual perpetual calendar of wood and engraving plastic.

Offer individual perpetual calendars of wood and engraving plastic.
To browse full materials range, please visit www.trotec-materials.com

Preparation

Required material
  • Veneer Bamboo 3 mm (119799) - 1 sheet for the back
  • TroLase 0.8 mm (L204-203) - 4 quarter sheets for the calendar sheets
  • Screws (diam. 5 mm, 20 mm long) with butterfly nut - 2 pieces
Laser machine used
Tip

Use a honeycomb cutting table to achieve the best cutting and engraving results.

wooden-calendar.zip

ZIP

Download now

Step by step

Trolase calendar
Step 1

Step 1: Import/create design template

Import our designs into your graphic program and adapt it according to your requirements.

Download PDF files

Laser cut wood and plastic calendar
Step 2

Step 2: Laser processing

Position the material on the laser table and cover the rest of the engraving area for optimum exhaust performance. Send the wood job  and then the four TroLase jobs to the laser machine.

LASER PARAMETERS WOOD:

500 dpi resolution
Cutting: 100% power, 0.7% speed, 1000 ppi, air assist on

LASER PARAMETERS TROLASE: 

500 dpi resolution
Engraving (black): 35% power, 30% speed, 600 ppi, air assist on, z-offset +1 mm, HQ mode (advanced material settings)
Cutting (red): 2.5% power, 0.5% speed, 1000 Hz, air assist on, z-offset +2 mm
Cutting (blue): 25% power, 2% speed, 1000 ppi, air assist on, z-offset  +2 mm
Cutting (cyan): 50% power, 2% speed, 1000 ppi, air assist on

TIPS:

Select the following options in JobControl® to get perfect cutting results.

  • Optimised geometries
  • Inner geometries first
  • Engraving from bottom to top reduces the cleaning of the engraved and cut materials
Completed wood and Trolase calendar
Step 3

Step 3: Post-processing

Once you have finished the laser process, clean the TroLase material with water. Then use two binding screws to fix the calendar sheets and mount the calendar to a wall.

Speedy series
The ideal laser engraver and cutter for personalisation.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo