--------------------------
acrylic-wood-memo-matching-game

Print & Cut memo matching game

Step by step instructions

acrylic-wood-memo-matching-game

Print & Cut memo matching game

Step by step instructions

Looking for promotional giveaways or gifts which can easily be customisable to customers equirements? Then follow our tutorial to create your own laser cut memory game using MDF and acrylic. To purchase Trotec materials visit our engraving supplies webshop

Preparation

Required material
  • 2 sheets MDF 600x300mm, 6mm thick
  • 1/4 sheet TroGlass Clear 10 mm
  • Material to cover the engraving table, such as paper
Machine used
  • Speedy 360, 100 Watts with a 2.5" lens
  • JobControl® Vision camera system
  • Aluminium cutting grid table or honeycomb cutting table for laser cutting the MDF
  • Acrylic cutting grid for laser cutting the acrylic

This sample can be created using any Speedy laser from the Speedy 300 platform or above which has JobControl® Vision laser software installed.

Important

Make sure that "Send Beziers and paths to driver" option is activated in your software as the JobControl® Vision software will not recigonise the registration marks without it activated.

graphics-files-matching-game.zip

ZIP

Download now

Step by step

Images to be printed for the memory game
Step 1

Step 1: Picture cards

The first step is to either use our design or create your own. Print the design directly onto the MDF using a UV printer.
(Find tips for the graphics creation for JobControl® Vision)

Send the job to the laser machine using the below settings. Please do not use custom settings as the registration marks will not be recognised by JobControl® Vision.

Print settings:

Process mode Resolution Cut line
Cut Job 1000 dpi none
Halftone Others
Colour enhanced geometries, inner geometries first
Laser cutting the acrylic holder for matching game
Step 2

Step 2: Laser process picture cards

Create the parameter settings. The recommended settings will differ depending on your laser machine and its available laser power.
The printing process used can also have an impact on the laser parameters.

Tips and tricks for using JobControl® Vision laser software are available here: JobControl® Vision software

Important: When laser cutting wood, please use the nozzle with small diameter. You can also increase the pressure of your air assist.

Tip: Apply application tape to reduce the traces of smoke. Do not cover the registration marks as the JobControl® Vision camera system will not be able to "read" them. 

LASER PARAMETERS REGISTRATION MARKS:

Colour Process Power (%) Speed (%) ppi/Hz
black RegMark - - -
Passes Air Assist Z-Offset Advanced
- - - -

LASER CUTTING PARAMETERS:

Color Process Power (%) Speed (%) ppi/Hz
red Cut CO2 90 0.6 1000
Passes Air Assist Z-Offset Advanced
1 on   -

TIP:

  • We used the standard laser parameters from JobControl® optimised for quality
  • You can download material parameters for JobControl® on our website www.troteclaser.com
JobControl laser software settings for memory game
Step 3

Step 3: Acrylic holder

We produced an acrylic holder for the picture cards.

Tip: Check the kerf when producing the base plate, it may need to be adapted for yuour design.

Send the job to the laser using the below settings:

Print settings:

Process mode Resolution Cut line
Cut Job 500 dpi -
Halftone Others
- enhanced geometries, inner geometries first
Laser cutting acrylic holder
Step 4

Step 4: Laser process acrylic holder

Create the parameter settings which as before will differ depending on your laser machine and the laser power available.

Important: When laser cutting acrylic, use the nozzle with big diameter. You can also increase the pressure of your air assist.

The pole may be bent during laser cutting.

LASER CUTTING PARAMETERS:

Colour Process Power (%) Speed (%) ppi/Hz
red Cut CO2 95 0.1 20000
Passes Air Assist Z-Offset Advanced
1 on -3 mm -

TIP:

  • We used the standard quality laser parameters from JobControl®
  • The material parameters of JobControl® can be downloaded our website www.troteclaser.com
Assembling the acrylic holder
Step 5

Step 5: Finishing

Clean the laser cut edges of the MDF cards and then put the stand together.

Your completed memory matching game with holder is ready for use.

Inspiration

  • Let your creativity out. With this game you can change the shape of the picture cards or use different materials. You can also add a logo or other text on the back of the playing cards or branding purposes.
  • To create a fancy effect we engraved the laser cutting edge with a stripe pattern. An easy way to do this is to put the cards on the holder, place it inside the laser machine and engrave all 4 sides. 

Speedy series
The ideal laser engraver and cutter for personalisation.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo