Festive Cupcake
or muffin Case

Create the graphic in a graphics program or import our template. The parcels are defined as engraving areas by the black fill. The snow crystals and border lines must be defined as cutting lines (width: hairline; R: 255; G: 0 B: 0). Additionally, you can add text at the bottom of the graphic for a personal touch.

To bend the strip later to a muffin case, bend the graphics in Adobe Illustrator with the warping tool or in Corel Draw with the 'Envelope' tool (menu: Effects > Envelope > Simple arc > putty). Hold Ctrl and then drag the lines to the desired arc.

SPEEDY 300 80 WATTS PARAMETERS:

Cutting: Power: 300% - Speed: 1.5% - Frequency: 1000Hz- Air Assist: ON 
Engraving: Power: 70% - Speed: 80% - Frequency: 500ppi - Air Assist: ON - Z-Offset: 1mm - High Quality: ON

In the menu plate setup, choose the bottom start position. Remove the protection foil from the laminate and check the vacuum. Focus the laser on the material and off you go!

• Consider the cutting sequence: The cutting lines are done bottom up in the production process. Therefore, place the outline at the top position in Corel Draw Object Manager.
• For an increased vacuum, cover unused parts of the table with paper.
• Select the engraving start position as 'bottom'. This prevents deposits from setting on engraved areas which could discolour the product.
• First, clean with a damp cloth and then dry the material, preferably while still in the machine.
• If discoloured residue is present, check the parameters, focus and check on the rest of the laminate on the table.