Give a simple notebook a personal touch

The sketchbook was refined with a fine engraving and personalized with a name. Open the PDF design and enter your chosen name. As always, you can also use your own design.

Parameters used:

The following parameters produce a brown engraving on the emerald sketchbook:
Engraving: Power: 20% - Speed: 30% - Frequency: 500 ppi - Air Assist: ON - Z-Offset: -1 mm

Note:

Other colors may react differently.

The Jottbook has a flexible cover that can be easily cut with a laser. We have created a tree design for our notebook. To give more stability to the fine details, we've glued a piece of paper on the inside of the cover after the laser process.

1: table
Use the Aluminum Cutting Grid Table and cover the surface around the workpiece to focus the vacuum suction.

2: air flow shutter
If using an air flow shutter, please close it to achieve optimal suction on the table and not on the exhaust slots.

3: laser process
Open the design and send it to the laser.

Parameters used:

Cutting: Power: 20% - Speed: 0.5% - Frequency: 1000 Hz - Air Assist: OFF -
Z-Offset: -1 mm