![magnetic film laser cut](/static_processed/771d2cc57e3e553c4c751e43c9b9d906/.jpg?{"image":"https://backend.troteclaser.com/static/images/knowledge/diy-samples/magnets-cut-from-film/laser-cutting-magnets.jpg","edits":{"resize":{"width":1280,"height":640,"fit":"cover"}},"outputFormat":{"format":"webp"}})
Do-it-yourself
fridge magnets
Buat set magnet kulkas sendiri dengan instruksi dan templat pemotongan laser.
Persiapan
Bahan yang diperlukan
Gunakan lapisan laminasi laser atau polyester yang dicetak dengan film magnetik di bagian belakang
Laser Trotec yang Digunakan
- Speedy300
- 60 watt
- lensa 2 inci
Tip
- Defokus sedikit untuk hasil ukiran yang rata.
- Jangan memotong laminasi, hanya proses pemotongan. Seperti ini, Anda dapat mengeluarkan bahan satu potong dan kemudian memecahkan bagian-bagian kecil tanpa masalah.
![](/static_processed/d9c97688548621db04813bb0e87c19b1/.pdf?{"image":"https://backend.troteclaser.com/static/_processed_/c/f/csm_magnet-Lasermag_0387eb9789.png","edits":{"resize":{"width":630,"fit":"cover"}},"outputFormat":{"format":"webp"}})
Langkah demi Langkah
Langkah 1: Magnet yang terbuat dari lapisan laminasi laser
Buka file PDF dan kirimkan ke laser untuk mengukir dan memotong magnet. Parameter laser dapat bervariasi, karena bergantung pada mesin yang digunakan dan daya laser yang tersedia.
parameter laser yang Diasarankan:
hitam (ukiran): daya 50 %, kecepatan 80 %, frekuensi 500 ppi, Air Assist on
Merah (pemotongan): daya 45 %, kecepatan 1 %, frekuensi 1000 Hz, Air Assist on
![magnetic sticker laser engraver](/static_processed/3a84dbaa466e014ecc7bf5bf98d0359a/.jpg?{"image":"https://backend.troteclaser.com/static/images/knowledge/diy-samples/magnets-cut-from-film/trotec-laser-monster-magnets.jpg","edits":{"resize":{"width":650,"fit":"cover"}},"outputFormat":{"format":"webp"}} "trotec-laser-monster-magnets.jpg")
Step 2: Cutting your Magnets (JobControl Vision Necessary)
Once your material is prepped and ready for cutting, place it inside your laser machine. This file already has all the registration marks needed to make the software work. Once the material is in the machine, open the cutting file in JobControl Vision and send it to the laser machine using the following laser parameters.
Please note that these cutting settings may also change depending on what laser machine and material you are using.
Recommended laser parameters:
| Color | Process | Power (%) | Speed (%) | ppi/Hz |
|---|---|---|---|---|
| Red | Cut CO2 | 32 | 0,8 | 5000 |
| Passes | Air Assist | Z-Offset | Advanced |
|---|---|---|---|
| 1 | ON | - | - |
![](/static_processed/5b58a61a467804661df93e96a66f70dc/laser-engraver-speedy-400-left.png?{"image":"https://backend.troteclaser.com/static/images/Laser_Machines/Speedy_Series/laser-engraver-speedy-400-left.png","edits":{"extract":{"top":142,"left":497,"width":933,"height":393},"resize":{"width":650,"fit":"cover"}},"outputFormat":{"format":"webp"}})
![](/static_processed/39b137145fe3b080cdb057970b3d2919/contact-ferdinand.jpg?{"image":"https://backend.troteclaser.com/static/images/contact/contact-ferdinand.jpg","edits":{"resize":{"width":194,"height":194,"fit":"cover"}},"outputFormat":{"format":"webp"}})
