Personalized slate hangers

Preparation

Required material:

Slate Ornaments

Machine used:

Speedy 360
80 watts
2" lens
Vacuum Table or Aluminum Cutting Grid Table

This sample can also be made on any machine from the Speedy series.

Slate ornaments shapes

PDF

Download now

PDF

Download now

Step by step

Step 1

Design

Import our template and adapt it to your requirements.

With "Create job" move the design to the "Prepare" screen.

TIP: The template with the conturs of all ornaments can be found in the download section.

Step 2

Laser process

Place the job to the desired position and adapt the settings. The laser parameters may vary depending on the type of laser machine and available laser power.

Send the job to the "Queue" for Laser processing.

Inner geometries first: Off
Skip overlapping cut lines: Off

Effect	Engrave Quality
Process	Engrave
Layers	black
Power (%)	80
Speed (%)	70
DPI	500
Source	CO2
Air Assist	On
Z-offset	-
Passes	1
Power Correction	20
Direction	Top down
Dithering	None
Engraving Mode	Standard