Glass lantern

Lanterns fit perfectly as a modern table decoration for weddings. We will show you step by step how to laser engrave individual wedding decorations. This lantern can also be engraved for many other occasions such as Christmas or birthdays.

Preparation

Used material

Glass lantern, angular, 10x10x10 cm
Candle, height ca. 8 cm, diameter ca. 6 cm
Paper towel

Machine used

Laser engraver Speedy 400
120 Watt
2" lens
vacuum table

You can also produce this pattern with another machine from the Speedy laser engraver series.

Tips

For this lantern we have chosen to engrave using damp kitchen paper: this prevents the glass from splintering during engraving.

To prepare the glass, you will need a sheet of kitchen paper, some water and a sponge or spray bottle. Place a single, thin layer of kitchen paper on the spot where you want to engrave the lantern and moisten it with the sponge or spray bottle. For best results, make sure that the paper towel does not include any folds or air bubbles.

Tips and tricks for glass engraving with the laser

Wedding Glass Lantern

ZIP

Download now

ZIP

Download now

Step by step

Step 1

Step 1: Import/create laser template

Create your own design or use our free template. Now send the job to the laser with the settings below.

Print settings

Process mode	Resolution	Cut line
Standard	500dpi	none

Halftone	Others
Color	Optimized Geometries

Step 2

Step 2: Laser process

Next you make the parameter settings. Our suggested parameters may vary depending on the laser machine used and the available laser power. In order to prevent early drying of the kitchen paper, the blowing is deactivated during the engraving process.

Position the lantern on the vacuum table. Place a sheet of paper under the glass to prevent possible scratches on the glass. For an optimal engraving result, the surface to be engraved must have an even height. If the wind light has a beveled shape, please compensate for any differences in height.